Page 2 of 2

Re: 15c - Tippax refuse collector

Posted: Fri Aug 15, 2014 6:52 pm
by johnboy
We've still got to work out how the hinge arms/braces are going to be classified on this model, but I was lucky enough to pickup another ftbpw without the vent-hole. These two have got different hinge arms/braces so another one to add to the table hopefully at some point.

Re: 15c - Tippax refuse collector

Posted: Sat Aug 16, 2014 5:31 am
by Tinman
For years and years, I had one in my display that was quite unusual. The garbage box was a brownish beige-gray color that was very close the the color of the first issue of the 38a. It was not repainted and was all original. It's new owner is someone who is quite private with his collection.

Re: 15c - Tippax refuse collector

Posted: Sat Aug 16, 2014 10:09 am
by kerbside
Hello Antonin, yes I have all four (4) of those variations of the 15c with-out the peephole.

Hello John when referring to the three (3) different thickness of the arms, then you could also refer to the widths of the three (3) different braces,

Image
Very thin brace.

Image
Thin Brace these two different width braces are on the same model, variation # 1.

Image
Thick brace.

The only trouble collecting the variations as in Stannards is the braces he does not list. :( :x

George T.

Re: 15c - Tippax refuse collector

Posted: Sun Aug 17, 2014 3:04 pm
by kerbside
Also the three different thickness of the hinge, as John did mention in an earlier post.

Image

George T.

Re: 15c - Tippax refuse collector

Posted: Mon Aug 18, 2014 11:29 pm
by johnboy
Thanks for the nice clear photos George.