It was broken, now it's fixed. 42c
Posted: Mon Apr 20, 2020 5:02 am
Who will be the first to post what's different now on this repaired and restored model?
A useful resource for collectors of British diecast toys
http://vbd2-archive.in-nz.com/forum/
Bzzzt. Securing the boom by alternate means, that's something that had to be done (If I wanted the boom to pivot and stay on the body) regardless of any damage to the model. So, while a good answer, there was physical damage and missing part(s) on the model that had to be repaired/replaced - that's what you need to be looking for. When you spot it, you'll realize it. BTW, in the morning (after a drop of epoxy has cured), I will paint that replacement fastener and it will nearly blend in with the model.Malibu wrote:You replaced the rivet at the turntable (right word?) by a screw, pop rivet or something else.
Winner, Winner, Chicken Dinner! I needed an new tip on the Iron Fairy and the hydraulic ram (to go into the hydro-sleeve) was missing. I had a Jumbo crane with the boom broken where it attaches to the weight box. So, that broken boom gave up it's opposite end and the hydraulic ram for the Iron Fairy. I think it looks pretty good, all things considered.yellowfoden wrote:Very clever Joe,
My initial thought was the nice plum or maroon colour as apposed to the red but being a little too obvious. It took me a while but do you now have an 11c Jumbo crane without the hook end of the boom in your beater box?
Bert