Drivers

Morestone, Benbros, Charbens, DCMT, Kemlows & Moko.
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Drivers

Post by Idris »

I recently acquired this group of drivers, solely for the Condon dumper driver on the right.
The one in the middle is, I think, a Dinky tractor driver, but what's the one on the left? He seems to be quite small-scale and is operating four levers, suggesting to me that he might be a crane driver.
Can anyone provide a positive ID for the two non-Condon drivers?
Attachments
Drivers.jpg
Drivers.jpg (11.61 KiB) Viewed 2037 times
yellowfoden
Posts: 626
Joined: Mon Sep 16, 2013 3:21 am
Location: Aust

Re: Drivers

Post by yellowfoden »

The driver on the left operating the levers looks to be like the one from the Moko Mechanical Tractor.

Bert
Attachments
moko circa 1948 mechanical tractor.JPG
moko circa 1948 mechanical tractor.JPG (23.86 KiB) Viewed 2028 times
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Drivers

Post by johnboy »

The driver with the levers was also used on the early Moko excavators & bulldozers too. I'm not 100% sure about the middle one, but I don't think the moko/Lesney drivers had a locating pin underneath, but I may be mistaken.
John
There's nothing regular about wheels
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Drivers

Post by Idris »

I agree that the one on the left is the Moko crawler/bulldozer driver.
The middle one is not the Moko Lesney driver because if i) the pin, and ii) the Lesney version has one arm across his chest.
User avatar
misterpop
Posts: 1311
Joined: Sun Sep 15, 2013 11:15 pm
Location: Manchester England UK.

Re: Drivers

Post by misterpop »

Great thread ,now where can I get 5 of the Moko ones?.?
Heres the man with the bargains.Always open to offers from this sites members..http://www.ebay.co.uk/sch/misterpop/m.h ... m=&_ipg=25
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Drivers

Post by Idris »

misterpop wrote:Great thread ,now where can I get 5 of the Moko ones?.?
Don't know, but PM me with an offer and you'll only need four! :D
yellowfoden
Posts: 626
Joined: Mon Sep 16, 2013 3:21 am
Location: Aust

Re: Drivers

Post by yellowfoden »

I believe the driver in the middle is a Dinky from the 27d (340) Land Rover as used also on the 27 series tractor but the Land Rover driver has his feet cut off.
I had to get out my Dinky bible from Mike and Sue Richardson to refresh my memory a bit as I remember encountering this about 30 years ago when helping sort a collection. Is the right hand of yours missing?
I also remembering finding some slight differences as per their hats.
Here is a pic of the driver on the tractor and note the extension on his left foot.

Bert
Attachments
driver - note the mounting method left foot.JPG
driver - note the mounting method left foot.JPG (58.03 KiB) Viewed 2007 times
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Drivers

Post by Idris »

yellowfoden wrote:Is the right hand of yours missing?
Yes, it is! Well spotted!
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Drivers

Post by Idris »

Many thanks to all who contributed to this thread. Once again, the speed with which unknown models are identified by VBD experts is truly amazing!
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Drivers

Post by Idris »

If anybody can use either the Moko or the Dinky driver, please let me know. I can do the Dinky driver for the cost of the postage, but would be looking for a small additional contribution in the case of the crawler/bulldozer driver.
Locked