Page 1 of 1
Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Wed Mar 29, 2017 12:05 am
by 4D2D
Dinky 986 Mighty Antar Low Loader & Propeller. Can anyone help please ?. Someone with the original model would be a great help. I'm working on an other 3D project and need to know the prop and plinth sizes from the original items... Picture attached. If anyone can help sizes in mm please.
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Wed Mar 29, 2017 2:09 pm
by 4D2D
If no one has the Prop and Plinth and just the low loader, then the size of the platform as shown in the picture would be of great help
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Thu Mar 30, 2017 5:48 pm
by starni999
Hi,
Plinth = W 40mm
H 16mm
L 53mm
Prop = H 39mm
D 94mm
Lets see one when it's done!
Cheers
Chris Warr
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Thu Mar 30, 2017 9:38 pm
by 4D2D
Thanks Chris that's a lot of help... Will post when I have one finished... Again many thanks.. Regards Bob.
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Mon Apr 03, 2017 7:37 pm
by 4D2D
Chris as promised here's the finished item so far. I know the top of the prop is slightly different from the original but this is an on going project and will improve at a later stage.
Thanks again for your help.
Thank you again Bob.
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Mon Apr 03, 2017 7:50 pm
by Malibu
Hi Bob,
the parts look good.
Do you have your own printer?
Regards
Stephan
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Tue Apr 04, 2017 12:27 pm
by starni999
Hi Bob,
They are looking really great! Nice one!
CW
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Wed Apr 05, 2017 4:58 pm
by 4D2D
Thanks Chris and Stephen..
Stephen yes I have my own 3d printer it's a lot of fun. It takes quite a while to get into. Learning the different cad software I find
difficult at times. I went for a good quality printer as this makes a big difference with the finished article. The one I went for
was the Prusa i3 MK2 if you google it the printer will come up. This I found for the quality and the price this machine takes quite a bit beating
amazing printer and user friendly....
Thanks again Chris for the measurements.
Re: Dinky 986 Mighty Antor Low Loader Prop Size
Posted: Wed Apr 05, 2017 6:12 pm
by Malibu
Hi Bob,
thanks for the info about the printer.
I´m still thinking about buying one or not because it always takes quite a long time when I order parts at Shapeways.
Stephan