Page 1 of 1

Taking off axle clips

Posted: Tue Aug 23, 2016 9:40 pm
by godsey1
What is the best way of taking off the axle clips of the transitional vehicles? Thanks for any help,

Tony

Re: Taking off axle clips

Posted: Tue Aug 23, 2016 9:47 pm
by motorman
godsey1 wrote:What is the best way of taking off the axle clips of the transitional vehicles? Thanks for any help,

Tony
With very little pressure they pop off very easily, try it with a beater and you will see how easy it is. No skill involved!!!

Re: Taking off axle clips

Posted: Tue Aug 23, 2016 9:50 pm
by godsey1
Thanks for the info motorman. I will try it in a bit and see how it goes. I just don't want to mess it up.

Re: Taking off axle clips

Posted: Tue Aug 23, 2016 10:05 pm
by motorman
godsey1 wrote:Thanks for the info motorman. I will try it in a bit and see how it goes. I just don't want to mess it up.
Put a little pressure on the narrow end of the clip with a small flat head screwdriver and you will see the clip flex up and pop off. They are extremely easy to swap.

Re: Taking off axle clips

Posted: Wed Aug 24, 2016 12:59 am
by godsey1
Got it to come after a little prying. Now I need to find a set as this set is messed up. Thanks again.

Tony

Re: Taking off axle clips

Posted: Wed Aug 24, 2016 1:14 pm
by motorman
godsey1 wrote:Got it to come after a little prying. Now I need to find a set as this set is messed up. Thanks again.

Tony
Tony, when you do find another set of clips they push back on easy aswell with a little bit of finger pressure.