Page 1 of 1
03-B BEDFORD 7½ TON TIPPER
Posted: Mon Jul 06, 2015 1:03 pm
by johnnijhuis
- jncpR11206.jpg (7.33 KiB) Viewed 1590 times
I made a picture of the ridge which is missing at the site.
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Mon Jul 06, 2015 5:39 pm
by GHOSTHUNTER
You might like to read the following thread about this model...
viewtopic.php?f=4&t=2227#p18416 and then look at this...
viewtopic.php?f=4&t=2227&start=10#p18596
GHOSTHUNTER.
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Mon Jul 06, 2015 8:48 pm
by johnnijhuis
Hi thanks a lot!!! However where can I find those topics to add and/or compare? I know gerorge pages but the addition you showed me on his pages in the first link I can't find on the board. Please help!
Regards,
john
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Mon Jul 06, 2015 9:56 pm
by GHOSTHUNTER
Hello John, if you go back into the thread in my First link and click on 'Reply', your comments will be part of that thread, but you will see it placed on the next available page, not directly under where you click 'Reply'.
Ghosty.
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Tue Jul 07, 2015 3:38 am
by Brad Pittiful
this models variation confuses me...is the lip from the end of the bed lines and raised...or is it a line across the bed lines only
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Tue Jul 07, 2015 6:38 am
by Idris
Brad Pittiful wrote:this models variation confuses me...is the lip from the end of the bed lines and raised...or is it a line across the bed lines only
I still think there's a chance that this is nothing more than tooling misalignment.
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Wed Jul 08, 2015 9:24 am
by johnnijhuis
Hello John, if you go back into the thread in my First link and click on 'Reply', your comments will be part of that thread, but you will see it placed on the next available page, not directly under where you click 'Reply'.
Ghosty.[/quote]
Thanks for your quick answer.
Ghosty that one worked for me but is not my problem. If I use your link I get everyting because the thread shows 4 pages. I f I go to George Kerbside's page I only get one page ans missing all the other 3.
See picture
- Image28.jpg (21.06 KiB) Viewed 1463 times
[quote="GHOSTHUNTER"]
So if I am at Georges page I only see 1 page. If I click on your link I see 4 pages.
Any idea?
Thanks in advance
John
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Wed Jul 08, 2015 9:39 am
by johnboy
I don't know why, but there are two separate topics called casting 3 in George's RW casting show index (page 3 and page 4). Perhaps a kindly admin could tidy this up?
viewtopic.php?f=4&t=757
viewtopic.php?f=4&t=2227&start=40
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Wed Jul 08, 2015 11:39 am
by johnnijhuis
johnboy wrote:I don't know why, but there are two separate topics called casting 3 in George's RW casting show index (page 3 and page 4).
Thanks a lot John. That solved my mistery!!!!
John
Re: 03-B BEDFORD 7½ TON TIPPER
Posted: Wed Jul 08, 2015 12:18 pm
by Idris
How very odd! You would have thought that the Forum software would prevent the creation of a topic having exactly the same name as another thread in the same area.
Anyhow, I've merged them and deleted the (more or less) duplicated posts.