Corgi 'CLASSICS' 1912 Rolls-Royce Silver Ghost.
Posted: Wed May 20, 2015 9:22 pm
The Silver Ghost was introduced into the 'CLASSICS' range during August 1966 as model number 9041, it was based on a real car with a Barker 'Pullman' carriage type body. The model was an instant success and to keep up with demand, many examples were made up to 1969 when production was suspended.
The picture below shows most of the examples in my own collection...
...as you can see there are more than just the One version. What you see are essentially a production run from the first 1966 issue (starting at left), up to the 'Hardy Boys' version and then the Two re-issues from 1970 and 1985 (finishing at right rear). Not all versions are shown as some are in storage and I am unable to get them, as Two versions are missing from the 1985 production.
The above picture shows Black exhaust and rear brake drums on the left model with Grey exhaust and brake drums on the right model, both models have the 'Domed' rivets. Later versions have 'Countersunk' rivets.
The Two known window frame colurs on the pre-85 production models, the model on the left has Tan frames and is very hard to find, with the more common colour of Brown frames on the right model.
Only Two known box types, with or without the text telling you to 'REMOVE THE MODEL FROM THE REAR'.
...and finally my own version with some extra detailing added.
This has steerable front wheels, revolving starting-handle and a 'Spirit of Ecstacy' mascot made out of a single strand of electrical wire, filled with solder and fixed onto a flattened shirt pin. It is then passed through a hole in the top of the grille so she can be turned like on a real car so as not to fowl the bonnet panel when opened.
The whole steering method I devised can be added to many toy or model cars with only minor adjustments specific to that model, one feature I did not put on this model is working suspension, however, I have a spare model destined to be converted into the famous C. S. Rolls 'Balloon Car' Silver Ghost, which will have full suspension along with the steerable front wheels.
GHOSTHUNTER.
The picture below shows most of the examples in my own collection...
...as you can see there are more than just the One version. What you see are essentially a production run from the first 1966 issue (starting at left), up to the 'Hardy Boys' version and then the Two re-issues from 1970 and 1985 (finishing at right rear). Not all versions are shown as some are in storage and I am unable to get them, as Two versions are missing from the 1985 production.
The above picture shows Black exhaust and rear brake drums on the left model with Grey exhaust and brake drums on the right model, both models have the 'Domed' rivets. Later versions have 'Countersunk' rivets.
The Two known window frame colurs on the pre-85 production models, the model on the left has Tan frames and is very hard to find, with the more common colour of Brown frames on the right model.
Only Two known box types, with or without the text telling you to 'REMOVE THE MODEL FROM THE REAR'.
...and finally my own version with some extra detailing added.
This has steerable front wheels, revolving starting-handle and a 'Spirit of Ecstacy' mascot made out of a single strand of electrical wire, filled with solder and fixed onto a flattened shirt pin. It is then passed through a hole in the top of the grille so she can be turned like on a real car so as not to fowl the bonnet panel when opened.
The whole steering method I devised can be added to many toy or model cars with only minor adjustments specific to that model, one feature I did not put on this model is working suspension, however, I have a spare model destined to be converted into the famous C. S. Rolls 'Balloon Car' Silver Ghost, which will have full suspension along with the steerable front wheels.
GHOSTHUNTER.