Page 1 of 3
9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:19 am
by Diecast
First of all Happy New Year to all guys here. Today I would like to show you a very interesting model 9a Dennis Fire Engine. It is a model with a small escape ladders wheels. Usually it is mentioned that the ladders wheels are smaller and have 16 spokes. Because it is rather a rare model, it was impossible to verify it somewhere. Here are the dimensions:
- Ø11mm (circa plus, minus 0.2 mm)
- 10 spokes
- rounded rims
- 4.5 mm hubs
Antonin
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:21 am
by Diecast
a comparison of 9a Dennis with ladders wheels ø11mm and "standard" ø13mm
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:24 am
by Diecast
some photos for Nick.
Escape ladders wheels ø11x10 spokes, rounded rims, 4,5mm hubs
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:26 am
by Diecast
Escape ladders wheels ø13x12 spokes, rounded rims, 3,5mm hubs
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:27 am
by Diecast
Escape ladders wheels ø13x12 spokes, squared rims, 2,75mm hubs
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:28 am
by Diecast
Escape ladders wheels ø13x12 spokes, squared rims, 4,0mm hubs
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:41 am
by nearlymint
Happy new year Antonin, very interesting model.
Can you show the over side showing the crimped end.
I know the wheels from the wagon and horses has been seen on this model, maybe there are other models with these wheels. J
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:49 am
by johnboy
nearlymint wrote:Happy new year Antonin, very interesting model.
Can you show the over side showing the crimped end.
I know the wheels from the wagon and horses has been seen on this model, maybe there are other models with these wheels. J
Happy new year from me as well Antonin. A very nice model with the small wheels, I was trying to remember the earlier discussion about these and I couldn't recall the details, thanks for the memory jog Jason
The only rarer wheels I've seen on these were the 16 spokes which came up on ebay a year or so ago (and had lots of interest at the time).
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 11:55 am
by nearlymint
Maybe its the small front wheels of the cart, here is a picture of the rear wheels from the last discussion I can remember.
- 9a.jpg (109.88 KiB) Viewed 1054 times
j
Re: 9a Dennis Fire Engine
Posted: Thu Jan 01, 2015 12:12 pm
by Diecast
nearlymint wrote:Happy new year Antonin, very interesting model.
Can you show the over side showing the crimped end.
I know the wheels from the wagon and horses has been seen on this model, maybe there are other models with these wheels. J
Happy New Year Jason, John. Here is the photo of the crimped axle
Antonin