Please to view this label.
Please to view this label.
This model already on my model page.
But, I ask this Talkshow on this page.
Send to compare a photo.
Because I do not agree with Tinman opinion.
59a Decal
Re: 59a Decal
I got this one at sandown today not sure about it axle ends don't look right the print on one of the decals is a bit off
am I correct in thinking original decals are slightly raised on the printing as they are on this one (sure I saw it somewhere on here)
wasn't expensive so I'm happy with it anyway
am I correct in thinking original decals are slightly raised on the printing as they are on this one (sure I saw it somewhere on here)
wasn't expensive so I'm happy with it anyway
- Attachments
-
- 012 (800x600).jpg (175.75 KiB) Viewed 1257 times
-
- 011 (800x600).jpg (156.75 KiB) Viewed 1257 times
-
- 007 (800x600).jpg (161.47 KiB) Viewed 1257 times
-
- 008 (800x600).jpg (187.71 KiB) Viewed 1257 times
-
- 006 (800x600).jpg (176.12 KiB) Viewed 1257 times
reg
-
nickjones
- Site Admin
- Posts: 2355
- Joined: Tue Nov 20, 2012 12:54 am
- Location: Clacton on Sea, Essex, UK
Re: 59a Decal
Yes Reg, If you run your fingernail over the lettering of the decal you will feel the letters, If the decal is smooth it is a reproduction,
Nick Jones.
In sunny Clacton-on-Sea, Essex, UK
In sunny Clacton-on-Sea, Essex, UK
Re: 59a Decal
thanks Nick that gives me a lot more confidence in itnickjones wrote:Yes Reg, If you run your fingernail over the lettering of the decal you will feel the letters, If the decal is smooth it is a reproduction,
reg
Re: 59a Decal
The bulk of the reproduction decals are created by the same screen printing process. The newer decals don't have the same thickness of ink layered upon them, none the less, you can still feel the layers on a good reproduction decal too.
It might be time to start my "Bucket List."
Re: 59a Decal
Mike, I'm 99% sure the decal on your model is a reproduction (without even seeing it in person). The type is all wrong, the spacing is all wrong. The "G" in sewing is all but touching the "S" in machines. Compare it to the rest of your 59a models. It's still a nice model (and hard to find), I wouldn't mess with it but you need to know it's not an original decal!
It might be time to start my "Bucket List."
Re: 59a Decal
I have examined my variation code 1 59a and it has rectangular door decals (as would be expected given the position of the decal guides on subsequent releases).
I agree with Joe: the decal is question is a replacement.
I agree with Joe: the decal is question is a replacement.
-
jimgallegos
- Posts: 348
- Joined: Sun Sep 15, 2013 4:13 pm
Re: 59a Decal
I have to agree the label looks very much like reproduction labels I have seen. That being said, this is one of my all time favorite Matchbox RW models.
Jim G.Come join us at the 2019 Gathering in New Mexico. 19-21 July 2097. email me @ matchb0x1@aol.com for information
Re: 59a Decal
...............and. is the sticker on the other side of the model Oky?
- Attachments
-
- dscn9772.JPG (142.87 KiB) Viewed 1202 times
Mike & Nico from Austria.