Page 1 of 2
24b - Weatherhill excavator - bucket pivot pin
Posted: Sat Mar 01, 2014 3:46 pm
by tandyfan
24b-3's with and without yellow painted pivot pin.
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sat Mar 01, 2014 6:54 pm
by Diecast
tandyfan wrote:24b-3's with and without yellow painted pivot pin.
nice that you have mentioned it. It is a very often overlooked variation. The most 24b have the yellow painted pivot pin, but there are several variations with an unpainted pin.
Antonin
1) with small GPW ø9x20, DC axles, DC unpainted pivot pin
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sat Mar 01, 2014 6:54 pm
by Diecast
2) with small GPW ø9x20, DC axles, DR unpainted pivot pin
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sat Mar 01, 2014 6:55 pm
by Diecast
3) with GPW ø10x24, DC axles, DR unpainted pivot pin
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sat Mar 01, 2014 6:57 pm
by Diecast
4) with GPW ø10x24, DR axles, DR unpainted pivot pin
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sat Mar 01, 2014 6:58 pm
by Diecast
5) a little bit strange variation with GPW ø10x24, DC axles, DR painted pivot pin
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sun Mar 02, 2014 9:27 am
by Diecast
to make a short summary, the detail with/without grille (already mentioned)
A.
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sun Mar 02, 2014 9:36 am
by Diecast
and with/without the small protrusion on the bonnet
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sun Mar 02, 2014 9:39 am
by Diecast
and without/with the "WH infill"
Re: 24b - Weatherhill excavator - bucket pivot pin
Posted: Sun Mar 02, 2014 12:39 pm
by johnboy
The engine cover on the left has a central casting line, there's the wider moulding in the middle example and the wider moulding with the central casting line on the right.