VBD2 is closed. Please go to https://vbd3.co.uk instead.

Posted: **Fri Jan 12, 2018 12:49 pm**

Hi all,

I needed some ladders and antennas for my 62b´s.
Of course there are spareparts avaialbe but they are quite expensive and doing them on your own is more fun.
The problem is that my colleague who printed the parts must suffer under red and green blindness.

: (c) Malibu; 62b.JPG (48.3 KiB) Viewed 6750 times

Stephan

Posted: **Fri Jan 12, 2018 4:33 pm**

They look fine and I am sure you could sell some to other collectors.

Ghosthunter.

Posted: **Sat Jan 13, 2018 5:26 pm**

other than being green those look really good Stephan !

zBret

Posted: **Sun Jan 14, 2018 11:54 am**

GHOSTHUNTER wrote:They look fine and I am sure you could sell some to other collectors.

The parts need some corrections and I hope that my colleague will be able to print in red as well
If anybody needs some parts he can contact me.

Stephan

Posted: **Tue Jan 16, 2018 3:23 am**

Stephen, once again, your 3-D skills are impressive!
Please let me know when your friend finds the raw materials to print in red!
Thank you
Kurt

Posted: **Tue Jan 16, 2018 6:24 pm**

MatchboxFreak wrote:Stephen, once again, your 3-D skills are impressive!
Please let me know when your friend finds the raw materials to print in red!
Thank you
Kurt

This is nothing special.
Everbody in a 3D-course can learn this within a day.

I will let you know when I can get the parts in the red.

Stephan

Posted: **Sun Jan 21, 2018 9:15 pm**

This is stunning, Stephan.
I've had several prints in my hands, but I could see the individual layers.
Can one recognize the individual layers in your prints?
How big is the layer thickness?
SF

Posted: **Sun Jan 21, 2018 9:40 pm**

Anyone out there 3D printing propellers for the Dinky 290 Hovercraft ?
Would they be too brittle though ?

Posted: **Mon Jan 22, 2018 12:00 pm**

SuperFast wrote:This is stunning, Stephan.
I've had several prints in my hands, but I could see the individual layers.
Can one recognize the individual layers in your prints?
How big is the layer thickness?
SF

Thanks - The parts are made in SLA - printing.
My friends printer is able to print 10µm layers.

AJR wrote:Anyone out there 3D printing propellers for the Dinky 290 Hovercraft ?

If I could have a scetch with all measurements and some good pictuters or the real part in hands it should be no big problem.

Stephan

Posted: **Wed Oct 10, 2018 4:34 pm**

Today I received some new 3D-printed parts.
First is the chassis for the VW-Bus made by Matchbox for Eheim.
Eheim used the dark red body to build their "Draisine"