VBD2 is closed. Please go to https://vbd3.co.uk instead.

Posted: **Thu Oct 29, 2015 9:16 am**

Malibu wrote:Today I will start a new post with parts made by this technology for Matchbox cars - there are a few more to come.

What would also be interesting would be to have a general instruction to 3D printing, including how you get from having an original in your hand to getting the machine to print a copy.

Posted: **Thu Oct 29, 2015 9:16 am**

Ah so that's what it was, well done looks to be a good fit.

Please do create a specific thread for 3D printing, it is a very fascinating aspect for modelers and could become very useful for just the sort of thing you have shown us.

If you can, can you also explain the method of creating the file or 3D information to start with that is stored on A 'Pen Drive' or 'Memory Card', the method of actual printing it pretty straight forward, but most of us here on the forum may be wondering how you actually start with the raw information.

GHOSTHUNTER.

Posted: **Thu Oct 29, 2015 9:18 am**

Our posts have crossed, so there are at least Two more members who are interested...!

Ghosty.

Posted: **Thu Oct 29, 2015 9:41 am**

Unless "Tinman" has any objection, can I suggest a 3D printing thread is put into the...'Tinman's Restoration Handbook' section.

GHOSTHUNTER.

Posted: **Thu Oct 29, 2015 5:25 pm**

GHOSTHUNTER wrote:Unless "Tinman" has any objection, can I suggest a 3D printing thread is put into the...'Tinman's Restoration Handbook' section.

GHOSTHUNTER.

Done

Stephan

Posted: **Sat Oct 31, 2015 1:36 pm**

Hi,

also I finished this week the Muir-hill with broken hinges.
Special thanks to Tinman for showing how to fix this things.
Because the hinges broke again while trying to fix the axle of the tipper I tooked a thi round shell and glued to short axels from both sides into it.
You can see it on the last picture.
A "Laing" Label is still missing.
Stephan
Before

: (c) Malibu; Muir_Hill.JPG (50.1 KiB) Viewed 545 times

After

: (c) Malibu; Muir_Hill_1.JPG (45.4 KiB) Viewed 545 times

: (c) Malibu; Muir_Hill_2.JPG (52.52 KiB) Viewed 545 times

: (c) Malibu; Muir_Hill_3.JPG (31.33 KiB) Viewed 545 times

Posted: **Sat Nov 14, 2015 11:27 am**

Hi,

her are some new models which I bought in the last two weeks.
The 6a Quarry truck had a broken hinge and is repaired and feshly painted now.
Have a nice weekend.

Stephan