Can you identify this model?
Re: Can you identify this model?
Keep going..
Heres the man with the bargains.Always open to offers from this sites members..http://www.ebay.co.uk/sch/misterpop/m.h ... m=&_ipg=25
Re: Can you identify this model?
Thanks in advance
- Attachments
-
- IMG_9993.JPG (91 KiB) Viewed 403 times
-
- IMG_9988.JPG (121.12 KiB) Viewed 403 times
-
- IMG_9986.JPG (79.18 KiB) Viewed 403 times
-
- IMG_9985.JPG (28.29 KiB) Viewed 403 times
-
- IMG_9984.JPG (82.15 KiB) Viewed 403 times
-
- Posts: 245
- Joined: Thu Dec 10, 2015 4:55 pm
Re: Can you identify this model?
CLOwy
Sorry no idea about the green tractor but I think the orange road roller might be a Kemlow with the roof missing based on the holes on the top of the bodywork which look to be for roof supports.
With regard to my unknown MG model I have now received the job lot it was part of It was very dusty and is solid red in colour.
I think it is a 1/24 white metal kit as it is very heavy and is brush painted. Underneath it is quite detailed but overall the finish is fairly crude with traces of glue and poor alignment of the panels. There is no makers name at all - I think there is a company called Wills finecast who have made this type of kit so it might be one of their models. Photo of job lot below - can you name the model in yellow with the orange tilt?
Sebastian
Sorry no idea about the green tractor but I think the orange road roller might be a Kemlow with the roof missing based on the holes on the top of the bodywork which look to be for roof supports.
With regard to my unknown MG model I have now received the job lot it was part of It was very dusty and is solid red in colour.
I think it is a 1/24 white metal kit as it is very heavy and is brush painted. Underneath it is quite detailed but overall the finish is fairly crude with traces of glue and poor alignment of the panels. There is no makers name at all - I think there is a company called Wills finecast who have made this type of kit so it might be one of their models. Photo of job lot below - can you name the model in yellow with the orange tilt?
Sebastian
- Attachments
-
- Another job lot.jpg (323.86 KiB) Viewed 393 times
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: Can you identify this model?
Wills Finecast took over the AUTO-KIT range of white metal models and it certainly sounds like that could be it. Wills Foinecast are now under the South Eastern Finecast name.
The yellow snow plough is by Solido from their Toner Gam range.
Ghosthunter.
The yellow snow plough is by Solido from their Toner Gam range.
Ghosthunter.
-
- Posts: 245
- Joined: Thu Dec 10, 2015 4:55 pm
Re: Can you identify this model?
Absolutely correct on the Solido - I bet you didn't have to search like I did on eBay for matching snow ploughs!GHOSTHUNTER wrote:Wills Finecast took over the AUTO-KIT range of white metal models and it certainly sounds like that could be it. Wills Foinecast are now under the South Eastern Finecast name.
The yellow snow plough is by Solido from their Toner Gam range.
Ghosthunter.
The MG model does seem to be the same as this Wills finecast one for sale on eBay
https://www.ebay.co.uk/itm/WILLS-FINECA ... rk:10:pf:0
The kit components are shown in this photo from the same listing
https://i.ebayimg.com/images/g/K6cAAOSw ... -l1600.jpg
Sebastian