Page 2 of 2
Re: 16c Scammell Snowplough
Posted: Sat Jan 28, 2017 4:44 am
by Diecast
I have added the third picture. But still I am not 100% sure about sequence of the variations. Especially the step from the large to smaller triangular brace seems to me a little bit illogical.
Antonin
Re: 16c Scammell Snowplough
Posted: Tue Apr 10, 2018 12:09 am
by joembox
My apologies for not responding in a while to the post about the 16C Scammell. The Scammel I posted about a few years ago has the following attributes - Red Decal,2 open steps on each side, open hole, two small rectangular braces and one rectangular brace (i.e ‘c’) as referenced by ‘Diecast’ below. The rivet itself is closed with No to one side and 16 on the other side of the rivet. I do have another orange decal Scammel which made the comparisons very interesting.
Impressed by the level of detail by all on this forum.
Should anyone desire pictures again, let me know as it has been a while.
Thanks, Joe