Page 2 of 2

Re: Casting #47

Posted: Mon Jun 29, 2015 6:37 am
by Idris
artherfonz wrote:Hi all i have three examples with trim to radiator and 0.75mm toungue,third model from left is nicks code 9
Image
That shows perfectly what I mean. I think the two on the left and the one on the right have hand-painted trim, whilst the fourth one (where the trim does not cover the whole of the grille) is mask-sprayed.

Re: Casting #47

Posted: Mon Jun 29, 2015 7:11 am
by artherfonz
hi all, metal wheels and no trim to radiator added
Image

cheers steven

Re: Casting #47

Posted: Mon Jun 29, 2015 11:33 am
by GHOSTHUNTER
I tend to agree with Hugh on the 'Mask' Vs 'Hand' trim painting until this picture below, its the same picture but imagine for some domestic reason (cropping went wrong on the computer!!), If this was the only available picture we had access to, it would be assumed all the models were mask trimmed, because of how consistant and tidy the Silver paint is down the sides and the bottom of the grilles. It is only when you see the very tops we see untidy painting suggesting hand applied.
20150629_110121_HDR.jpg
20150629_110121_HDR.jpg (59.23 KiB) Viewed 4950 times
GHOSTHUNTER.

Re: Casting #47

Posted: Tue Sep 22, 2015 12:50 pm
by numi
Unrecorded.
numi

Re: Casting #47

Posted: Thu Dec 17, 2015 2:37 am
by Brad Pittiful
Image


Image

superfast bumper on a regular wheel

Image

Re: Casting #47

Posted: Wed Sep 21, 2016 9:03 am
by matchboxkiwi
Not sure what I have here. Need some help!
I bought the DAF Tipper on the left at the weekend thinking I didn't have it! I was disappointed with my self to find I did have it.
Then it was time to put it in the swap box and I thought I'd better just check it over.
On turning it over for inspection I discovered two things;
The number plate or towing hitch.
IMG_0143.JPG
IMG_0143.JPG (84.66 KiB) Viewed 4635 times
The second thing is to do with the lack of a strengthening bar behind the rear axle.
The model I had is on the left and the one I just bought is on the right.
IMG_0146.JPG
IMG_0146.JPG (79.99 KiB) Viewed 4635 times
IMG_0148.JPG
IMG_0148.JPG (96.1 KiB) Viewed 4635 times
Cheers, Steve
Matchboxkiwi

Re: Casting #47

Posted: Wed Sep 21, 2016 1:44 pm
by GHOSTHUNTER
An object lesson in looking at every model we aquire because as Steve has just discovered, just when you think you have it, something different can reveal itself.

Nice find Steve, better go and check all your 'Beaters' now... :D

Ghosty.

Re: Casting #47

Posted: Sun Dec 25, 2016 5:57 am
by kwakers
The last 2 versions of the #47 DAF Tipper with "Superfast" rear bumper can be found with either an outside measurement of 6.3mm or 7.0 mm on their front tow guides. I can verify both are in our collection now Thanks to Jason. kwakers

Re: Casting #47

Posted: Thu Jan 05, 2017 6:06 am
by Tinman
numi wrote:Unrecorded.
numi
What are the specs which make this one unrecorded?

Re: Casting #47

Posted: Wed Jan 11, 2017 2:34 pm
by kerbside
Yes come-on numi let Joe (tinman) know and me along side others why your 47b is unrecorded, as your silence is
almost Golden. ;) ;)

George T.