That shows perfectly what I mean. I think the two on the left and the one on the right have hand-painted trim, whilst the fourth one (where the trim does not cover the whole of the grille) is mask-sprayed.artherfonz wrote:Hi all i have three examples with trim to radiator and 0.75mm toungue,third model from left is nicks code 9
Casting #47
Re: Casting #47
-
artherfonz
- Posts: 67
- Joined: Mon Sep 16, 2013 2:22 am
Re: Casting #47
hi all, metal wheels and no trim to radiator added
cheers steven
cheers steven
-
GHOSTHUNTER
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: Casting #47
I tend to agree with Hugh on the 'Mask' Vs 'Hand' trim painting until this picture below, its the same picture but imagine for some domestic reason (cropping went wrong on the computer!!), If this was the only available picture we had access to, it would be assumed all the models were mask trimmed, because of how consistant and tidy the Silver paint is down the sides and the bottom of the grilles. It is only when you see the very tops we see untidy painting suggesting hand applied.
GHOSTHUNTER.
- 20150629_110121_HDR.jpg (59.23 KiB) Viewed 4629 times
Re: Casting #47
Unrecorded.
numi
numi
- Attachments
-
- IMG_0719.JPG (103.58 KiB) Viewed 4542 times
numi
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
-
Brad Pittiful
- Posts: 1265
- Joined: Sun Sep 15, 2013 5:03 pm
- Location: The Tardis
Re: Casting #47
superfast bumper on a regular wheel
Please use a web hosting site (like photobucket) to store pictures so you can post them here, using attachments makes it hard to view the pictures when you have to scroll to see them. Seeing comparisons of models is hard to see with attachments too.
-
matchboxkiwi
- Posts: 858
- Joined: Sun Sep 15, 2013 7:18 pm
Re: Casting #47
Not sure what I have here. Need some help!
I bought the DAF Tipper on the left at the weekend thinking I didn't have it! I was disappointed with my self to find I did have it.
Then it was time to put it in the swap box and I thought I'd better just check it over.
On turning it over for inspection I discovered two things;
The number plate or towing hitch.
The second thing is to do with the lack of a strengthening bar behind the rear axle.
The model I had is on the left and the one I just bought is on the right.
Cheers, Steve
Matchboxkiwi
I bought the DAF Tipper on the left at the weekend thinking I didn't have it! I was disappointed with my self to find I did have it.
Then it was time to put it in the swap box and I thought I'd better just check it over.
On turning it over for inspection I discovered two things;
The number plate or towing hitch.
- IMG_0143.JPG (84.66 KiB) Viewed 4314 times
The model I had is on the left and the one I just bought is on the right.
- IMG_0146.JPG (79.99 KiB) Viewed 4314 times
- IMG_0148.JPG (96.1 KiB) Viewed 4314 times
Matchboxkiwi
-
GHOSTHUNTER
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: Casting #47
An object lesson in looking at every model we aquire because as Steve has just discovered, just when you think you have it, something different can reveal itself.
Nice find Steve, better go and check all your 'Beaters' now...
Ghosty.
Nice find Steve, better go and check all your 'Beaters' now...
Ghosty.
Re: Casting #47
The last 2 versions of the #47 DAF Tipper with "Superfast" rear bumper can be found with either an outside measurement of 6.3mm or 7.0 mm on their front tow guides. I can verify both are in our collection now Thanks to Jason. kwakers
Re: Casting #47
What are the specs which make this one unrecorded?numi wrote:Unrecorded.
numi
It might be time to start my "Bucket List."
Re: Casting #47
Yes come-on numi let Joe (tinman) know and me along side others why your 47b is unrecorded, as your silence is
almost Golden.
George T.
almost Golden.
George T.