Superfast Casting # 21
Re: Superfast Casting # 21
Nice addition Al
I would think that it's a second issue following the RW stle cab with the tab , assuming the cab modification was in production before the base, vhtf well done lad
I would think that it's a second issue following the RW stle cab with the tab , assuming the cab modification was in production before the base, vhtf well done lad
reg
Re: Superfast Casting # 21
Nick Mentions: Initially the yellow cab unit was unchanged, however with the baseplate now being rivited in more places the assembley for the bulk of all SF21d made was simplified by removing the tongue from the cab where it had slotted into the front numberplate holder.
On the baseplate,this slot in the front numberplate was removed. Crossover issues exist without the tongue on the cab but with the slot in the front numberplate but these are scarce.
Hi MM,could yours be the Crossover/Initial production short-run after a few Color-Trials when the tongue had to to be removed for much easier assembly using the earlier base but sooner found it a bit bare/odd and so had it filled in to form the full numberplate together with the other casting changes.Hope im on the right lines here and this helps
numi
On the baseplate,this slot in the front numberplate was removed. Crossover issues exist without the tongue on the cab but with the slot in the front numberplate but these are scarce.
Hi MM,could yours be the Crossover/Initial production short-run after a few Color-Trials when the tongue had to to be removed for much easier assembly using the earlier base but sooner found it a bit bare/odd and so had it filled in to form the full numberplate together with the other casting changes.Hope im on the right lines here and this helps

numi
numi
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
Re: Superfast Casting # 21
Thanks Numi. This explanation you provide seems logical. My thinking was that the removal of the tongue was to allow for the solid bumper to be applied and rather than bin the remaining bumpers with slots they used any remaining stock. If thats the case then these were probably leaving the factory at the same time as the solid bumper variation albeit in smaller number.......just a thought. 

MOTORMAN
"Kill all my demons and my angels will die too"
"Kill all my demons and my angels will die too"
- Brad Pittiful
- Posts: 1265
- Joined: Sun Sep 15, 2013 5:03 pm
- Location: The Tardis
Re: Superfast Casting # 21
Please use a web hosting site (like photobucket) to store pictures so you can post them here, using attachments makes it hard to view the pictures when you have to scroll to see them. Seeing comparisons of models is hard to see with attachments too.
Re: Superfast Casting # 21
Wow congratulations Dan , the SF#21 Foden with bumper slot. Very nice very rare, well done mate and welcome to the club 

MOTORMAN
"Kill all my demons and my angels will die too"
"Kill all my demons and my angels will die too"
- Brad Pittiful
- Posts: 1265
- Joined: Sun Sep 15, 2013 5:03 pm
- Location: The Tardis
Re: Superfast Casting # 21
im happy to be a member!motorman wrote:Wow congratulations Dan , the SF#21 Foden with bumper slot. Very nice very rare, well done mate and welcome to the club
Please use a web hosting site (like photobucket) to store pictures so you can post them here, using attachments makes it hard to view the pictures when you have to scroll to see them. Seeing comparisons of models is hard to see with attachments too.
Re: Superfast Casting # 21
Dan, could you please show is a photo of the baseplate? I would like to see how it looks on the front end. THX
Roland
Variations are bad for limited showcases
Variations are bad for limited showcases
Re: Superfast Casting # 21
Here is an image of the baseplate on my #21
- Attachments
-
- image.jpeg (53.81 KiB) Viewed 1726 times
MOTORMAN
"Kill all my demons and my angels will die too"
"Kill all my demons and my angels will die too"
Re: Superfast Casting # 21
THX MM, this doesn´t help identifying a treasure in a beater box, as the one without frontbase looks the same upsidedown 

Roland
Variations are bad for limited showcases
Variations are bad for limited showcases
Re: Superfast Casting # 21
Hi Everyone
Another Colortrail Variant.



diffrend colorbases.
Cheers Mathias
Another Colortrail Variant.



diffrend colorbases.
Cheers Mathias
SITE ADMIN WARNING: ANY PRE-PRODUCTION MODELS PICTURED IN THIS POST BY MBOX75 MAY BE FAKES!