Page 2 of 3
Re: RW59 B
Posted: Mon Nov 17, 2014 9:13 pm
by Ergomatic
johnboy wrote:Ergomatic wrote:johnboy wrote:When you examine the inner wheel wells, the early models (code 1 on Nick's list) have a smooth casting. This was soon changed and three wheel wells had diagonal lines cast in. I think what Ergomatic may be saying is that his gpw model doesn't have the diagonal lines, whereas Nick's list only shows the gpw with the lines. I must check mine.
It is correct, John! Do you know all of my thinks?
That would be spooky
I've checked mine, but as I thought, they have diagonals lines. It will be a difficult one to find I imagine, because the gpw models don't come up too often and that variation is well hidden
Don't worry, only a "D"box inside for BEA Coach
This was my first RW59B with GPW, later I bought another one whith 3 wheel wells, but missing bonnet decal, but about one month ago I found my 3rd, which is more or less near mint ( with 3 wheel wells too ). That was why I thinked it is fake and asked you.
Re: RW59 B
Posted: Mon Nov 17, 2014 11:47 pm
by nickjones
I would look at the axle ends as the wheels are more likely to have been swapped rather than the baseplate.
Re: RW59 B
Posted: Tue Nov 18, 2014 9:07 am
by Taniwha
My GPW 59b has smooth wheel wells. Not listed in Stannard etc. I am quite sure it has not been tampered with - there are no obvious signs, plus it came from my uncle who had it from new. Wheels have correct diameter and tread count.
Cheers,
Gavin
Re: RW59 B
Posted: Tue Nov 18, 2014 1:49 pm
by Ergomatic
nickjones wrote:I would look at the axle ends as the wheels are more likely to have been swapped rather than the baseplate.
Nick,
I took two closer pic, it seems original for me. If you have any question or more pics, please reply. I am open to send this piece to you, if you want check it. HUN/GB/HUN postage cost is mine of course.
Thank you and have a nice birthday again!
Peter
Re: RW59 B
Posted: Tue Nov 18, 2014 1:51 pm
by Ergomatic
Taniwha wrote:My GPW 59b has smooth wheel wells. Not listed in Stannard etc. I am quite sure it has not been tampered with - there are no obvious signs, plus it came from my uncle who had it from new. Wheels have correct diameter and tread count.
Cheers,
Gavin
Hi Gavin,
Good news
Peter
Re: RW59 B
Posted: Tue Nov 18, 2014 2:25 pm
by nickjones
Hi Peter.
The axle ends look fine to me, Looks like another one to add to the variation table, Cheers!.
Re: RW59 B
Posted: Tue Nov 18, 2014 2:41 pm
by Ergomatic
nickjones wrote:Hi Peter.
The axle ends look fine to me, Looks like another one to add to the variation table, Cheers!.
Gavin has another one. Cheers, Peter
Re: RW59 B
Posted: Tue Nov 18, 2014 5:51 pm
by GHOSTHUNTER
I agree, the axle-ends look very authentic and very 'Lesney' finished and opposing ends on one side of the car. Some fakers tend to put the large boss of the axles on the same side of the model, which is often wrong.
Well done Peter on capturing this one.
Ghosty.
Re: RW59 B
Posted: Tue Nov 18, 2014 8:44 pm
by Ergomatic
Thank you, Kevin!
Just imagine, it slept in the loft in the last one year, because I thinked it is fake....
I am very happy
Cheers, Peter
Re: RW59 B
Posted: Wed Nov 19, 2014 10:17 am
by Taniwha
Mine has the large bosses on opposite sides as well - here is an old photo of it, probably can't tell much from it!
Cheers,
Gavin
