Casting #16

A showcase of !-75 reg wheel models, a new model every week
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Casting #16

Post by GHOSTHUNTER »

Hi Guys, the way I see it is that they are intentional 'Fill-In' steps, done to stop the fine casting of the steps being damaged during the tumbling process. If you look at Dan's No.4 picture of the model laying on it's side you can see the delicate steps frame is bent. A similar job had to be done on at least one 'Yesteryear' that I know of, where a rear window frame was being damaged in tumbling and during general playing sessions, so because they could not actually 'fill-in' the whole rear window, they added little blocks to the inside of the roof just over where the top of the window frame contacts and these blocks helped prevent the frame from bending inwards.

The question still remains as to why only one side was treated in this way, I can only assume the other side was still strong enough, not to require the extra metal 'fill-in' but then someone has said the extra cost involved in doing both sides is negligible, so do it on both sides...!

Now that sounds silly I know, but stranger thinks have happened with Lesney models over the years!!

Ghosty.
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Casting #16

Post by Idris »

GHOSTHUNTER wrote:...I can only assume the other side was still strong enough, not to require the extra metal 'fill-in' ....
Since the tool loses metal over time, fine details such as open steps would only get stronger as the tooling got older, not weaker.
fintail
Posts: 154
Joined: Sun Sep 15, 2013 8:00 pm

Re: Casting #16

Post by fintail »

My 16s:

Image

Image

I usually don't collect models this new, but it was very cheap, why not, I like the casting:

Image
User avatar
nearlymint
Posts: 2330
Joined: Sun Sep 15, 2013 7:03 pm
Contact:

Re: Casting #16

Post by nearlymint »

GPW.
16
16
16.jpg (52.87 KiB) Viewed 7346 times
Nearlymint
Check my swaps page(rest has been under construction for years :))
https://sites.google.com/site/matchboxmagicgbbo00/home
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: Casting #16

Post by fixer »

nearlymint wrote:GPW.
16.jpg
:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
reg
User avatar
mike
Posts: 1895
Joined: Sat Sep 21, 2013 4:27 pm
Location: Österreich

Re: Casting #16

Post by mike »

fixer wrote:
nearlymint wrote:GPW.
16.jpg
:mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen: :mrgreen:
Congratulations Jason. :o :D
A wonderful model with the gray wheels.
We have long been on the search for this.
Mike & Nico from Austria.
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Casting #16

Post by johnboy »

Very nice indeed Jason, never seen one in the flesh. Back in the day, these don't seem to have been overly poular but I think they're great for play value when they're hooked up to the prime mover and loaded up.
John
There's nothing regular about wheels
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: Casting #16

Post by fixer »

now I'm settled
that would look nice behind my #15b gpw Rotinoff,nice find Jason
reg
User avatar
nearlymint
Posts: 2330
Joined: Sun Sep 15, 2013 7:03 pm
Contact:

Re: Casting #16

Post by nearlymint »

Thankyou Mike, John and Reg. These ones with the grey wheels seem hard to find, I do like these very much and as Reg said hooked
up with a grey wheel 15b they look very nice.
16
16
16.jpg (57.33 KiB) Viewed 7328 times
J
Nearlymint
Check my swaps page(rest has been under construction for years :))
https://sites.google.com/site/matchboxmagicgbbo00/home
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: Casting #16

Post by fixer »

Oh come on even more :mrgreen:
reg
Locked