73a RAF 10 ton Pressure Refuleller, unlisted variation

mike · Post by **mike** » Wed Jan 29, 2014 7:40 pm

Diecast wrote:HI Mike
Yes, it is a variation with closed oblong hole. The variation with open hole is rarer.
Antonin

Thank you Antonin.
and, of the metal casting under the tank? is okay?

Diecast · Post by **Diecast** » Wed Jan 29, 2014 8:02 pm

It is OK. Standard gap, no infill.
Antonin

nearlymint · Post by **nearlymint** » Wed Jan 29, 2014 8:40 pm

Hi Antonin,
I also have seen this hole before.

: 73a; ref.jpg (145.68 KiB) Viewed 494 times

Bit I am still looking for the infill one.
Jason

Diecast · Post by **Diecast** » Wed Jan 29, 2014 9:16 pm

Hi Jason, do you have the open hole by code 2? I have the question to code 1. Does your brace small round or oblong cross-section?
Antonin

nearlymint · Post by **nearlymint** » Wed Jan 29, 2014 9:27 pm

Diecast wrote:Hi Jason, do you have the open hole by code 2? I have the question to code 1. Does your brace small round or oblong cross-section?
Antonin

My open hole model is a code 1 with an oblong flat brace.
Jason

Diecast · Post by **Diecast** » Sat Feb 01, 2014 8:36 am

nearlymint wrote:
Diecast wrote:
My open hole model is a code 1 with an oblong flat brace.
Jason

I have code 1 with closed hole. I have open/closed hole by code 2. It seems that former code 1 should be changed to code 1 and 2, and former code 2 should be changed to 3 and 4.
Antonin

VBD2 is closed. Please go to https://vbd3.co.uk instead.

73a RAF 10 ton Pressure Refuleller, unlisted variation

Re: 73a RAF 10 ton Pressure Refuleller, unlisted variation

Re: 73a RAF 10 ton Pressure Refuleller, unlisted variation

Re: 73a RAF 10 ton Pressure Refuleller, unlisted variation

Re: 73a RAF 10 ton Pressure Refuleller, unlisted variation

Re: 73a RAF 10 ton Pressure Refuleller, unlisted variation

Re: 73a RAF 10 ton Pressure Refuleller, unlisted variation