There are two colours (or shades)
a) red
b) orange-red
Antonin
73b F1 Ferrari, unlisted variations
73b F1 Ferrari, unlisted variations
- Attachments
-
- DSCN2750.JPG (32.86 KiB) Viewed 779 times
Last edited by Diecast on Sat Jan 25, 2014 11:28 am, edited 1 time in total.
Re: 73b F1 Ferrari, unlisted variations
There are two types of steering wheels:
a) standard
a) standard
- Attachments
-
- DSCN2751.JPG (35.9 KiB) Viewed 779 times
Re: 73b F1 Ferrari, unlisted variations
b) "luxury"
- Attachments
-
- DSCN2752.JPG (35.98 KiB) Viewed 779 times
Re: 73b F1 Ferrari, unlisted variations
two types of exhaust and two types of hubs also (mentioned variation).
Antonin
Antonin
- Attachments
-
- DSCN2749.JPG (29.53 KiB) Viewed 779 times
- nickjones
- Site Admin
- Posts: 2355
- Joined: Tue Nov 20, 2012 12:54 am
- Location: Clacton on Sea, Essex, UK
Re: 73b F1 Ferrari, unlisted variations
Hi Antonin.
I also have an orange Ferrari and I'm sure it is a sunfade as it is red on the inside, You will have to pull the driver out and look under the footwell to see the true colour.
I also have an orange Ferrari and I'm sure it is a sunfade as it is red on the inside, You will have to pull the driver out and look under the footwell to see the true colour.
Nick Jones.
In sunny Clacton-on-Sea, Essex, UK
In sunny Clacton-on-Sea, Essex, UK
Re: 73b F1 Ferrari, unlisted variations
Hi Nick It seems that the colour is homogeneous ( you are right, some red painting could be sunfaded)
Antonin
Antonin
- Attachments
-
- DSCN4862.JPG (35.64 KiB) Viewed 758 times
Re: 73b F1 Ferrari, unlisted variations
Hi Antonin, nice to hear from you. As well as the exhaust diameters, the depth of the aperture inside the exhaust can vary. Most of mine are perhaps 1mm, but I have one which is 4-5mm.
John
There's nothing regular about wheels
There's nothing regular about wheels
Re: 73b F1 Ferrari, unlisted variations
Hi Johnjohnboy wrote:Hi Antonin, nice to hear from you. As well as the exhaust diameters, the depth of the aperture inside the exhaust can vary. Most of mine are perhaps 1mm, but I have one which is 4-5mm.
You are right, I have observed similar exhausts by my models.
Antonin