63B Foamite Crash Tender with green leaf springs.

Brad Pittiful · Post by **Brad Pittiful** » Mon Jan 13, 2014 6:03 am

found this item with the green leaf springs and two braces

kwakers · Post by **kwakers** » Thu Jan 23, 2014 4:36 am

I was never able to find any of the green leaf spring versions, they must be the toughest to find Brad. Very few Sellers show the base on these Foam Trucks, so finding needed versions is made even more difficult by that. Nice job! I'll have to start looking harder for these green springs now that you have pictured the first one I have ever seen. kwakers

kwakers · Post by **kwakers** » Thu Jan 23, 2014 4:36 am

I was never able to find any of the green leaf spring versions, they must be the toughest to find Brad. Very few Sellers show the base on these Foam Trucks, so finding needed versions is made even more difficult by that. Nice job! I'll have to start looking harder for these green springs now that you have pictured the first one I have ever seen. kwakers

Brad Pittiful · Post by **Brad Pittiful** » Fri Jan 24, 2014 5:36 am

hi Dick

i was lucky in recent weeks all of these ive checked had pictures of the base...i saw the green springs and bingo!

Post by **nickjones** » Fri Jan 24, 2014 3:15 pm

I just checked my ones, 6 with white springs and 4 with no springs but none with green springs.

Diecast · Post by **Diecast** » Sat Jan 25, 2014 9:48 am

Hi Brad
well done, it is pretty hard to get it. I have checked my models and found 2 x Foamite with green springs. The first one is with BPW ø12,5x40, the second one has BPW ø12,5x30.
Antonin

Diecast · Post by **Diecast** » Sat Jan 25, 2014 9:59 am

When I checked my 63b, the questions arised, where should be added the Foamite 63b with øBPW12,5x30. I think the models with green tinted springs should have the codes 1, 2 and the models with white springs should have the later codes. When I compare the base plate of the both models, the base plate of the models with the green tinted springs have the base plates without any damage - the die was intact.

Diecast · Post by **Diecast** » Sat Jan 25, 2014 10:02 am

But by the models with white springs (does not matter if with the silver or gold nozzle) there is small damage of the die. Your opinion is welcome.
Antonin

Post by **nickjones** » Sat Jan 25, 2014 1:31 pm

Hi Antonin.
This is the first one I have seen with 12x30 wheels,the green spring versions have already been recorded.

Post by **nickjones** » Sat Jan 25, 2014 3:09 pm

I have updated the 63b page to include Antonins 12.5x30 bpw version and renumbered the listing table to put the green spring versions first.
http://www.vintagebritishdiecasts.co.uk ... /xx63b.htm
you may need to refresh the page in order to see the new version.

VBD2 is closed. Please go to https://vbd3.co.uk instead.

63B Foamite Crash Tender with green leaf springs.

63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.

Re: 63B Foamite Crash Tender with green leaf springs.