Vectis lots

[Matchboxpat]

Just received the lots I have won from Vectis in Ali's Auctions from last September.

Wow, a lot of nice stuff !

AliCollection.jpg (76.01 KiB) Viewed 1972 times

21C with grey wheels

IMG_20181025_154235_1small.jpg (60.46 KiB) Viewed 1972 times

16C with grey wheels

IMG_20181025_154249small.jpg (63.07 KiB) Viewed 1972 times

13D with silver trim

IMG_20181025_154219small.jpg (64.35 KiB) Viewed 1972 times

Here is a 33B with knobby black wheels at left… The paint is actually matte.

IMG_20181025_154145_BURST001_COVERsmall.jpg (58.89 KiB) Viewed 1972 times

The 55B with silver wheels…

IMG_20181025_154335small.jpg (62.43 KiB) Viewed 1972 times

An interesting lot of 43C... with the main variables… Straight, short and long curved brace… solid and grooved ramp handle...Different foot… Ridge and no ridge…

IMG_20181025_153547small.jpg (79.46 KiB) Viewed 1972 times

IMG_20181025_153603small.jpg (69.21 KiB) Viewed 1972 times

4D blue stakes and clear windows 66C

IMG_20181025_154316small.jpg (77.27 KiB) Viewed 1972 times

30B with grey wheels

IMG_20181025_154357_1small.jpg (62.01 KiB) Viewed 1972 times

A trio of 70A...black, silver and grey wheels

IMG_20181025_154440_BURST002small.jpg (63.61 KiB) Viewed 1972 times

33C with frosted or clear rear window

IMG_20181025_154623 Small.jpg (93.95 KiB) Viewed 1972 times

To finish this, 51C Pointer… a question about these. The black sleeve is different, is this variable always coupled with the tipper block (wider on left or right side) ?

IMG_20181025_154034small.jpg (110.15 KiB) Viewed 1972 times

[yellowfoden]

To finish this, 51C Pointer… a question about these. The black sleeve is different, is this variable always coupled with the tipper block (wider on left or right side) ?

Hello Pat,
What a nice group you have just received and fun to go through. As a fine detail collector I like the 13d with silver mask trim, love the overspray on this one.

By tipper block do you mean the black hydro sleeve?
The hydro sleeve on the 51c is often found installed upside down (if there is a correct way!). If you have a look from the top you will see what I mean. If you have any other 16c Snow Plough you will possibly find it installed both ways there also.
The model on the right also looks to have a wider cross-member above the 3rd axle.

Enjoy going through these, Ali had some wonderful variations.

Bert

[numi]

Thats an exciting lot Pat...congrats
numi

[Brad Pittiful]

great stuff!

[johnboy]

Very nice lot, they'll keep you busy for a while

[Ergomatic]

Very nice, congrats!

[Matchboxpat]

To finish this, 51C Pointer… a question about these. The black sleeve is different, is this variable always coupled with the tipper block (wider on left or right side) ?

Hello Pat,
What a nice group you have just received and fun to go through. As a fine detail collector I like the 13d with silver mask trim, love the overspray on this one.

By tipper block do you mean the black hydro sleeve?
The hydro sleeve on the 51c is often found installed upside down (if there is a correct way!). If you have a look from the top you will see what I mean. If you have any other 16c Snow Plough you will possibly find it installed both ways there also.
The model on the right also looks to have a wider cross-member above the 3rd axle.

Enjoy going through these, Ali had some wonderful variations.

Bert

Bert, you are totally right and I feel a bit ridiculous never having yo think it could have been installed upside down ! That's exactly the case here.

And you are right, the right model has a wider hinge support. In fact, this variable is not even listed in Nick's variation guide.

Thanks !

[Matchboxpat]

I forgot to mention that most of these little beauties came with exceptionally crisp and beautiful complete boxes.

I strongly believe there were a lot of good deals to make in Ali's auctions. Prices were good and sometimes lower than they should, I would have bought a few more but unfortunately my budget is not unlimited !

[Malibu]

As you mentioned: Wow, a lot of nice stuff !

Stephan

[GHOSTHUNTER]

Some really nice models there Pat, you clearly have an Eye for sorting out the harder to find models

I notice some of the boxes have sticky labels applied. If these are not original retailers price stickers I would personally remove them but very carefuly, as they may be past the stage of easy removal without damaging the box artwork. If so, try some heat from a hair dryer to help soften the sticky compound.

Ghosthunter.