Roadmasters Artics

User avatar
motorman
Moderator
Posts: 6863
Joined: Sun Sep 15, 2013 6:09 pm
Location: Glasgow, Scotland

Re: Roadmasters Artics

Post by motorman »

GHOSTHUNTER wrote:"tlhIngan Hol Dajatlh'a' mm?"

No, part 'A' has to be put in first before part 'C', then you can tighten the screws.

Ghosty.
:lol:
MOTORMAN

"Kill all my demons and my angels will die too"
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Roadmasters Artics

Post by johnboy »

motorman wrote:
GHOSTHUNTER wrote:"tlhIngan Hol Dajatlh'a' mm?"

No, part 'A' has to be put in first before part 'C', then you can tighten the screws.

Ghosty.
:lol:
So where does part B go?
John
There's nothing regular about wheels
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Roadmasters Artics

Post by GHOSTHUNTER »

You've got a part 'B', that can't be right, shouldn't be a part 'B', its Swedish, they don't have part B's...

Ghosty.
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Roadmasters Artics

Post by johnboy »

GHOSTHUNTER wrote:You've got a part 'B', that can't be right, shouldn't be a part 'B', its Swedish, they don't have part B's...

Ghosty.
:D ok but the instructions do say A, then B, then B again, then A.
John
There's nothing regular about wheels
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Roadmasters Artics

Post by GHOSTHUNTER »

johnboy wrote:
GHOSTHUNTER wrote:You've got a part 'B', that can't be right, shouldn't be a part 'B', its Swedish, they don't have part B's...

Ghosty.
:D ok but the instructions do say A, then B, then B again, then A.
Sounds like you've got a poster for ABBA...

Ghosty.
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: Roadmasters Artics

Post by fixer »

Here are my artics including a 000 gauge guliver county
Attachments
20170129_165555-512x288.jpg
20170129_165555-512x288.jpg (23.03 KiB) Viewed 2674 times
20170129_170047-512x288.jpg
20170129_170047-512x288.jpg (22.65 KiB) Viewed 2674 times
20170129_165413-512x288.jpg
20170129_165413-512x288.jpg (24.81 KiB) Viewed 2674 times
20170129_165430-512x288.jpg
20170129_165430-512x288.jpg (27.65 KiB) Viewed 2674 times
20170129_165631-512x288.jpg
20170129_165631-512x288.jpg (20.22 KiB) Viewed 2674 times
reg
User avatar
Tinman
Moderator
Posts: 3915
Joined: Mon Sep 16, 2013 4:16 pm
Location: Florida, USA

Re: Roadmasters Artics

Post by Tinman »

I love the "Rocket Fuel" label on the tanker. Most toy makers get it wrong and no exception here. The only rocket fuel that truck could carry is RP-1 which, for all practical purposes is the same thing as the more refined kerosene used as jet engine fuel.
It might be time to start my "Bucket List."
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Roadmasters Artics

Post by johnboy »

Tinman wrote:I love the "Rocket Fuel" label on the tanker. Most toy makers get it wrong and no exception here. The only rocket fuel that truck could carry is RP-1 which, for all practical purposes is the same thing as the more refined kerosene used as jet engine fuel.
I wonder if this was ignorance or the fact that "Rocket Fuel" sounds a bit more exciting for a toy?
John
There's nothing regular about wheels
starni999
Posts: 470
Joined: Mon Sep 16, 2013 7:47 pm

Re: Roadmasters Artics

Post by starni999 »

Hi John,
You got the bulk carrier! :o That one is the hardest to find I reckon, been after one for ages. I still need the Milk tanker too. I've got a mint looking timber tractor, another couple of dropsides, and a low loader on the way though.
Cheers
CW.
starni999
Posts: 470
Joined: Mon Sep 16, 2013 7:47 pm

Re: Roadmasters Artics

Post by starni999 »

Hi all,
Finally got a Milk tanker, it had lost it's decals so a repro set from the Corgi Bedford look pretty good to me.
Got a pair of LS Land Rovers too, not artics, but I'll post them here anyway.
Cheers
CW.

Image

Image
Post Reply