Metallic Red(!) Y16-1

Lesney early large scale toys 1947-55 + Models of Yesteryear 1956 to date
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Metallic Red(!) Y16-1

Post by Idris »

Did anyone else notice this listing for a metallic red Yesteryear Y16-1 Spijker?

The listing states “Metallic red – the same colour as used on the Y7 Rolls-Royce chassis and roof. Not to be confused with the extremely rare solid maroon version”.
Attachments
$_57.jpg
$_57.jpg (53.69 KiB) Viewed 1751 times
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Metallic Red(!) Y16-1

Post by GHOSTHUNTER »

If this is genuine then it will make a nice investment for the lucky owner. These rarely come up for sale on the open market. If a set of good clear pictures could be viewed it should be possible to date the model fairly precisely to help establish the model's true status.

Ghosthunter.
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Metallic Red(!) Y16-1

Post by Idris »

GHOSTHUNTER wrote:If a set of good clear pictures could be viewed it should be possible to date the model fairly precisely to help establish the model's true status.
Follow the hyperlink in my original post.
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Metallic Red(!) Y16-1

Post by GHOSTHUNTER »

I did see those and a few are just about acceptable after some enhancement.

Ghosthunter.
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Metallic Red(!) Y16-1

Post by Idris »

GHOSTHUNTER wrote:I did see those and a few are just about acceptable after some enhancement.
That's a bit worrying. You would have thought that something as unusual as this would have had first-class photographs.
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: Metallic Red(!) Y16-1

Post by fixer »

I have bought from this seller a couple of times (just received a budgie vw today) and although descriptions are not the best there have been no problems as of yet
reg
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Metallic Red(!) Y16-1

Post by johnboy »

I've also had numerous purchases from the seller and all mine were good.
John
There's nothing regular about wheels
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Metallic Red(!) Y16-1

Post by GHOSTHUNTER »

Idris wrote:
GHOSTHUNTER wrote:I did see those and a few are just about acceptable after some enhancement.
That's a bit worrying. You would have thought that something as unusual as this would have had first-class photographs.
The one picture you have posted here on the forum is suffering from incorrect White balance adjustment, making all colours wrong. I have all those pictures saved from when we was looking at this model over on Mick Flack's 'Moyboyz' forum and will correct the colours the best I can, then I can asses the model.

I don't expect any bad dealings from the seller of this example, he is unlikely to be responsible for any fakery, not his thing, so he is probably selling it from a job lot of models or for someone else (always a good tip to move fake models, let someone else sell it!) but it will need to be scrutinized thoroughly before any conclusion of it's status.

Ghosthunter.
User avatar
YYS4BOB
Posts: 1448
Joined: Sun Sep 15, 2013 3:38 pm
Location: Sussex, England

Re: Metallic Red(!) Y16-1

Post by YYS4BOB »

Clear picture of the baseplate is all I need. Can then give a definitive answer. I'm away at the moment and only have an old netbook with me so cannot see the pictures very well. There are cating details that are peculiar to the maroon and green Spykers that don't appear on others.
Last edited by YYS4BOB on Wed Feb 17, 2016 6:15 pm, edited 1 time in total.
Bob
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Metallic Red(!) Y16-1

Post by Idris »

YYS4BOB wrote:Clear picture of the baseplate is all I need. Can then give a definitive answer.
Is this a known variation? If so, does it have colour trial or pre-production status?
Locked