My latest news

[Malibu]

Hi,
thanks for your replies.
Kevin the scale of both origin models are nearly the same: 25c 1:85 / 26c 1:86.
Stephan

[GHOSTHUNTER]

Hi,
thanks for your replies.
Kevin the scale of both origin models are nearly the same: 25c 1:85 / 26c 1:86.
Stephan

Stephan, are they the scales printed in Lesney catalogues, from an expert here on the forum or from your own measurements, because if they are from Lesney catalogues, you can not rely on the accuracy.

If they are correct scales then fine, it shows us how much bigger the real cab must be.

GHOSTHUNTER.

[Malibu]

Stephan, are they the scales printed in Lesney catalogues, from an expert here on the forum or from your own measurements

Kevin ther was a thread a few months ago: viewtopic.php?f=3&t=3916&hilit=scale+list
Thats where I got the info about the scale.
Stephan

[GHOSTHUNTER]

OK Stephan, I do remember that.

GHOSTHUNTER.

[Malibu]

Today I Show you a simple repaint.
It was pigeonblue bevor but this color didn´t match with the model so I painted it tourquise.
Stephan

(c) Malibu

Merc_1.JPG (22.16 KiB) Viewed 727 times

(c) Malibu

Merc_2.JPG (22.79 KiB) Viewed 727 times

[Malibu]

Hi,

here I have two Ferraris which I want to use to make one good one.

(c) Malibu

Ferrari.JPG (38.2 KiB) Viewed 709 times

Is it possible to transfer the Labels from the front model to the other one or would it be better to swap the wheels because the other one also has the steering wheel in place?

Stephan

[Ecclesley]

I would do a wheel transplant as the decals are impossible to re-transfer.
Or better, save both cars, by buying (after market) new decals (€ 2,50) and a steering wheel for one and a set of wheels for the other.
They both are worth saving I guess.

[Malibu]

I would do a wheel transplant as the decals are impossible to re-transfer.
Or better, save both cars, by buying (after market) new decals (€ 2,50) and a steering wheel for one and a set of wheels for the other.
They both are worth saving I guess.

Yes this would be the best but I coudn´t find wheels and rims for this car.
I have only found steering wheels, driver and label.
Stephan

[Ecclesley]

Well Stephan I think there is an alternative, and I could help you with that, it only requires patience.
The picture shows two wire wheels, originating from a wrecked Yesteryear Mercedes or Bentley.
These rims are bigger in diameter than the ones which belong to the Ferrari.
But by putting a thin rubber O ring on them, the total diameter should fit the F1 Ferrari quite well.
So what I need is to find another banger Yesteryear model and we have a complete set.
Do you think it is a good idea? Just my 2 centavos.

P1090920.JPG (59.05 KiB) Viewed 680 times

P1090923.JPG (63.7 KiB) Viewed 680 times

[Malibu]

Well Stephan I think there is an alternative, and I could help you with that, it only requires patience.The picture shows two wire wheels, originating from a wrecked Yesteryear Mercedes or Bentley.These rims are bigger in diameter than the ones which belong to the Ferrari.But by putting a thin rubber O ring on them, the total diameter should fit the F1 Ferrari quite well.So what I need is to find another banger Yesteryear model and we have a complete set.Do you think it is a good idea? Just my 2 centavos.

Oh yes thats a good idea and I think this should work.
I will try to find a beater MOY and try this out.
Thanks for your two centavos.

Stephan