aveling barford 1b
aveling barford 1b
Hello,
I wish everyone on the forum a happy New Year!
I bought a "1B Aveling Barford the second road roller"
In one of the rear wheels a, smaller wheel is present.
The usual colour is light green, but this one is, as you can see, dark green.
Therefore I thought it was the 1C.
Does this mean it one repainted, or is it original?
The axis appear to be original, therefore I think it's a genuine one, but I'm not sure, therefore I would like to know your opinions.
Best wishes,
Henk from the Netherlands
I wish everyone on the forum a happy New Year!
I bought a "1B Aveling Barford the second road roller"
In one of the rear wheels a, smaller wheel is present.
The usual colour is light green, but this one is, as you can see, dark green.
Therefore I thought it was the 1C.
Does this mean it one repainted, or is it original?
The axis appear to be original, therefore I think it's a genuine one, but I'm not sure, therefore I would like to know your opinions.
Best wishes,
Henk from the Netherlands
- Attachments
-
- Here the smaller wheel in the left rear wheel is visible.
- IMG_1362.JPG (1.49 MiB) Viewed 676 times
-
- IMG_1363.JPG (1.33 MiB) Viewed 676 times
-
- The left road roller is the 1B, and the right is the one that I bought, and not sure about the originality. As you can see the driver is completely green.
- IMG_1364.JPG (1.44 MiB) Viewed 676 times
- ChFalkensteiner
- Posts: 566
- Joined: Sun Sep 15, 2013 3:45 pm
- Location: Linz, Austria
- Contact:
Re: aveling barford 1b
The body colour on this model appears to be somewhat inconsistent, which indicates to me that it has probably been repainted, at least partially. Also the driver should normally always be brown on this model.
That additional smaller roller on the rear axle is something I have not seen before and cannot explain.
That additional smaller roller on the rear axle is something I have not seen before and cannot explain.
Re: aveling barford 1b
Looks to be a 1c to me and in the darker green than the 1b, as mine is. It almost looks as though there is a half of the two-piece front wheel stuck to inside of larger rear wheel. Error piece?
Jay
Jay
Mbox2000 / Jay
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: aveling barford 1b
I agree with Jay, it looks like half of the front roller has got stuck inside the rear wheel and has just been assembled by an operator dreaming of getting Home for Her Tea and has not noticed the error!
GHOSTHUNTER.
GHOSTHUNTER.
Re: aveling barford 1b
the comparison model is the same size.
Is it possible that the axles are renewed?
Is it possible that the axles are renewed?
Re: aveling barford 1b
Please get a photo bucket account or re-size your pics.
It might be time to start my "Bucket List."
- tractorboy
- Posts: 670
- Joined: Fri Sep 27, 2013 9:25 am
- Location: Auckland
- Contact:
Re: aveling barford 1b
"What one loves in childhood stays in the heart forever." ---Mary Jo Putney
Rodger
Rodger
Re: aveling barford 1b
Aaagh that's better, thanks tractor boy!!!
MOTORMAN
"Kill all my demons and my angels will die too"
"Kill all my demons and my angels will die too"
Re: aveling barford 1b
Sorry, i'm not so good with photo's and computers.
Thanks tractor boy.
Thanks tractor boy.