Stake Truck #20 GPW

All regular wheel 1-75 or miniatures topics
ozboxrox
Posts: 21
Joined: Sat May 02, 2015 2:46 am

Re: Stake Truck #20 GPW

Post by ozboxrox »

20a light gold trim?
20a light gold trim?
DSCN5214.JPG (645.7 KiB) Viewed 820 times
20a light gold trim?
20a light gold trim?
DSCN5211.JPG (677.41 KiB) Viewed 820 times
20a light gold trim?
20a light gold trim?
DSCN5210.JPG (675.9 KiB) Viewed 820 times
Glad to provide close up pics as follows. In my very humble opinion wheels and axles all look good the same as my other gpw version. The only query I have at this point in time is where did the light colored gold trim come from, factory or elsewhere?. The light I have on the model is making the trim appear silver, it's not until you put it next to a silver trim model you realize the difference. Anyway it will be good to hear what the experts have to say.
more 20a gold trim pics
more 20a gold trim pics
DSCN5209.JPG (679.3 KiB) Viewed 820 times
Attachments
20a gpw x 2 versions ?
20a gpw x 2 versions ?
DSCN5221.JPG (630.14 KiB) Viewed 820 times
20a light gold trim ?
20a light gold trim ?
DSCN5219.JPG (655.5 KiB) Viewed 820 times
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Stake Truck #20 GPW

Post by Idris »

ozboxrox wrote:The light I have on the model is making the trim appear silver, it's not until you put it next to a silver trim model you realize the difference.
Could this be a silver and gold mixture as we have seen on some other models?
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Stake Truck #20 GPW

Post by GHOSTHUNTER »

Idris wrote:
ozboxrox wrote:The light I have on the model is making the trim appear silver, it's not until you put it next to a silver trim model you realize the difference.
Could this be a silver and gold mixture as we have seen on some other models?
My thoughts as well, because the Gold does look rather weak and yes the photography process will have an effect as "Oz" has mentioned, but there are now more models displaying this type of paint trim and is it feasible they intentionally created that mix for the trimming process, as 'Out of the Tin' Gold would be too rich for small models such as these.

GHOSTHUNTER.
User avatar
johnboy
Posts: 4054
Joined: Sun Sep 15, 2013 3:10 pm
Location: Hertfordshire, England

Re: Stake Truck #20 GPW

Post by johnboy »

The few mixed trim versions I have look like a poor or patchy mix of the two colours and I had thought it may have been caused by someone topping up trim pots with paint, regardless of what colour trim was in the bottom (ie. silver on top of some gold in the pot or vice-versa)
John
There's nothing regular about wheels
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: Stake Truck #20 GPW

Post by GHOSTHUNTER »

johnboy wrote:The few mixed trim versions I have look like a poor or patchy mix of the two colours and I had thought it may have been caused by someone topping up trim pots with paint, regardless of what colour trim was in the bottom (ie. silver on top of some gold in the pot or vice-versa)
This is correct, being a plastic kit modeller myself, I have had to mix the Two colours and found they do not mix very well, certainly the type of model paints I was using in the 1970's.

GHOSTHUNTER.
User avatar
Idris
Site Admin
Posts: 5940
Joined: Sun Sep 15, 2013 6:10 pm
Location: Denbigshire, Wales

Re: Stake Truck #20 GPW

Post by Idris »

johnboy wrote:The few mixed trim versions I have look like a poor or patchy mix of the two colours and I had thought it may have been caused by someone topping up trim pots with paint, regardless of what colour trim was in the bottom (ie. silver on top of some gold in the pot or vice-versa)
This has always been my assumption too.
User avatar
motorman
Moderator
Posts: 6863
Joined: Sun Sep 15, 2013 6:09 pm
Location: Glasgow, Scotland

Re: Stake Truck #20 GPW

Post by motorman »

Idris wrote:
johnboy wrote:The few mixed trim versions I have look like a poor or patchy mix of the two colours and I had thought it may have been caused by someone topping up trim pots with paint, regardless of what colour trim was in the bottom (ie. silver on top of some gold in the pot or vice-versa)
This has always been my assumption too.
As removing the trim pot to clean it prior to a new shade of paint being added would have caused unacceptable delays on the production line it is very likely that the trim pots were topped up with the next available paint be it silver or gold.
MOTORMAN

"Kill all my demons and my angels will die too"
User avatar
numi
Posts: 1638
Joined: Sun Sep 15, 2013 2:43 pm
Location: Suid Afrika

Re: Stake Truck #20 GPW

Post by numi »

There certainly are silver & gold mixed trims on models extant but here isnt such a thing as light gold trim.This "gold" grille specimen clearly shows environmental consequences (rust/tarnish of the metals in the silver paint) and clearly non-factory as the silver remains pronounced thru this haze.Also if one has to dunk this or any old silver trimmed models into strong/semi strong chemicals they would certainly turn "light gold" as seen here.
numi
numi

One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: Stake Truck #20 GPW

Post by fixer »

numi wrote:There certainly are silver & gold mixed trims on models extant but here isnt such a thing as light gold trim.This "gold" grille specimen clearly shows environmental consequences (rust/tarnish of the metals in the silver paint) and clearly non-factory as the silver remains pronounced thru this haze.Also if one has to dunk this or any old silver trimmed models into strong/semi strong chemicals they would certainly turn "light gold" as seen here.
numi
i have a 3b with mixed trim but i can't find the post
reg
ozboxrox
Posts: 21
Joined: Sat May 02, 2015 2:46 am

Re: Stake Truck #20 GPW

Post by ozboxrox »

numi wrote:There certainly are silver & gold mixed trims on models extant but here isnt such a thing as light gold trim.This "gold" grille specimen clearly shows environmental consequences (rust/tarnish of the metals in the silver paint) and clearly non-factory as the silver remains pronounced thru this haze.Also if one has to dunk this or any old silver trimmed models into strong/semi strong chemicals they would certainly turn "light gold" as seen here.
numi
Hi Numi,
My post on this thread has gone quiet so I thought I'd try and keep it going for a while. I like your post about striving for contentment. Some history on the 20a stake truck gpw, gold trim. I purchased this model in the auction lot shown in the attached picture along with another 9 lots, all of which are genuine and most in excellent or better condition (my opinion only). Somewhere around 70 lesney 1-75's all up including a couple of very hard to find ones to add to my collection. It does seem strange that the previous owner/s decided to pick this one model out and repaint the trim and left all the rest genuine. From the posts I've read so far I'm currently sticking with "genuine" not to say that I won't change my mind if convinced.

OZBOXROX
Attachments
AUCTION PIC.png
AUCTION PIC.png (646.93 KiB) Viewed 763 times
Locked