03-B BEDFORD 7½ TON TIPPER

[johnnijhuis]

jncpR11206.jpg (7.33 KiB) Viewed 1532 times

I made a picture of the ridge which is missing at the site.

[GHOSTHUNTER]

You might like to read the following thread about this model...viewtopic.php?f=4&t=2227#p18416 and then look at this...viewtopic.php?f=4&t=2227&start=10#p18596

GHOSTHUNTER.

[johnnijhuis]

Hi thanks a lot!!! However where can I find those topics to add and/or compare? I know gerorge pages but the addition you showed me on his pages in the first link I can't find on the board. Please help!

Regards,
john

[GHOSTHUNTER]

Hello John, if you go back into the thread in my First link and click on 'Reply', your comments will be part of that thread, but you will see it placed on the next available page, not directly under where you click 'Reply'.

Ghosty.

[Brad Pittiful]

this models variation confuses me...is the lip from the end of the bed lines and raised...or is it a line across the bed lines only

[Idris]

this models variation confuses me...is the lip from the end of the bed lines and raised...or is it a line across the bed lines only

I still think there's a chance that this is nothing more than tooling misalignment.

[johnnijhuis]

Hello John, if you go back into the thread in my First link and click on 'Reply', your comments will be part of that thread, but you will see it placed on the next available page, not directly under where you click 'Reply'.

Ghosty.[/quote]

Thanks for your quick answer.

Ghosty that one worked for me but is not my problem. If I use your link I get everyting because the thread shows 4 pages. I f I go to George Kerbside's page I only get one page ans missing all the other 3.

See picture

Image28.jpg (21.06 KiB) Viewed 1405 times

[quote="GHOSTHUNTER"]

So if I am at Georges page I only see 1 page. If I click on your link I see 4 pages.

Any idea?

Thanks in advance
John

[johnboy]

I don't know why, but there are two separate topics called casting 3 in George's RW casting show index (page 3 and page 4). Perhaps a kindly admin could tidy this up?

viewtopic.php?f=4&t=757

viewtopic.php?f=4&t=2227&start=40

[johnnijhuis]

I don't know why, but there are two separate topics called casting 3 in George's RW casting show index (page 3 and page 4).

Thanks a lot John. That solved my mistery!!!!

John

[Idris]

I don't know why, but there are two separate topics called casting 3 in George's RW casting show index (page 3 and page 4). Perhaps a kindly admin could tidy this up?

viewtopic.php?f=4&t=757

viewtopic.php?f=4&t=2227&start=40

How very odd! You would have thought that the Forum software would prevent the creation of a topic having exactly the same name as another thread in the same area.
Anyhow, I've merged them and deleted the (more or less) duplicated posts.