red vauxhall victor 45 , fake or real

[joerimoko]

IMG_20150525_120243901_HDR by joeri smoor, on Flickr
IMG_20150525_120316061_HDR by joeri smoor, on Flickr
IMG_20150525_120341311_HDR by joeri smoor, on Flickr
IMG_20150525_120408954_HDR by joeri smoor, on Flickr
IMG_20150525_120644871_HDR by joeri smoor, on Flickr
IMG_20150525_120847115 by joeri smoor, on Flickr
IMG_20150525_121302661 by joeri smoor, on Flickr
IMG_20150525_121333396 by joeri smoor, on Flickr

[Idris]

Real.

[fixer]

What a shame that the paint has been striped nice reference piece though

[joerimoko]

Real.

Tank you for your message . i found it in a scrap box on the floor . verry sad that someone stript it ..but lucky only stripping

[joerimoko]

What a shame that the paint has been striped nice reference piece though

It wass cheap and fill up the hole

[GHOSTHUNTER]

This is a an example of any condition is worth having, because it is so rare and I would certainly leave it as it is.

GHOSTHUNTER.

[fixer]

Having a closer look I noticed it doesn't have the dash casting and what looks like a chisel cut rivet, would all genuine red ones have these features?

[GHOSTHUNTER]

The 'Non-Dashboard' versions are the earliest recorded castings and all Red models should be like the One shown by "joerimoko". The chisel cut rivet I took as being done by the owner to keep the base on after a repainting session, which as we can see has not yet taken place, but I suspect the body and base were separated just to allow the body to be sprayed from a can instead of just hand painting with a brush.

GHOSTHUNTER.

[Idris]

The 'Non-Dashboard' versions are the earliest recorded castings and all Red models should be like the One shown by "joerimoko". The chisel cut rivet I took as being done by the owner to keep the base on after a repainting session, which as we can see has not yet taken place, but I suspect the body and base were separated just to allow the body to be sprayed from a can instead of just hand painting with a brush.

To the best of my knowledge, the proper paint job (rather than overspray) on the inside of the casting is typical of the red 45a. Furthermore, I have seen what appeared to be a genuine red 45a with chisel-cut rivets. (The rivet post on the first-type body casting is fractionally too short to be successfully spun.) The complete absence of the dashboard brace and under-bonnet pips is also supportive of this this being a genuine red 45a.

[fixer]

thank you gentlemen I have only ever seen pictures of these