first of 2014 & some
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: first of 2014
Now that's out of the way...nice grit spreader variation and look at that 'MINI-DINKY' Cadillac in White, looks good in the picture, what is the baseplate like, any fatigue or distortion yet!
GHOSTHUNTER.
GHOSTHUNTER.
Re: first of 2014
and there's me thinking i'd found my firenzaGHOSTHUNTER wrote:Thanks Reg, as it has the un-common race decal #3, I was hoping it was a late version from 1968, but it is not, so you can keep it for your own growing (slowly!), Rolls-Royce and Bentley collection...
Ghosty.
reg
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: first of 2014
No, not quite, just a little bit longer...fixer wrote:and there's me thinking i'd found my firenzaGHOSTHUNTER wrote:Thanks Reg, as it has the un-common race decal #3, I was hoping it was a late version from 1968, but it is not, so you can keep it for your own growing (slowly!), Rolls-Royce and Bentley collection...
Ghosty.
Ghosty.
Re: first of 2014
Damb it!!!!!!!GHOSTHUNTER wrote:No, not quite, just a little bit longer...fixer wrote:and there's me thinking i'd found my firenzaGHOSTHUNTER wrote:Thanks Reg, as it has the un-common race decal #3, I was hoping it was a late version from 1968, but it is not, so you can keep it for your own growing (slowly!), Rolls-Royce and Bentley collection...
Ghosty.
Ghosty.
MOTORMAN
"Kill all my demons and my angels will die too"
"Kill all my demons and my angels will die too"
Re: first of 2014
sorry Kev don't know how I missed your post
the grit spreader is one I've been keeping an eye out for and popped up as a bin with two others in "normal" shades
the caddy hasn't got any fatigue that I have seen and apart from a little paint loss where the boot has rubbed on the body it also came with its garage/box
the grit spreader is one I've been keeping an eye out for and popped up as a bin with two others in "normal" shades
the caddy hasn't got any fatigue that I have seen and apart from a little paint loss where the boot has rubbed on the body it also came with its garage/box
reg
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: first of 2014
That's all right Reg, thanks for the update on the Caddy. These are very prone to baseplate warping, I have pictures of them even broken in Two which must be the final state of decay after not being able to bend anymore because of being fixed to the body.
GHOSTHUNTER.
GHOSTHUNTER.
Re: first of 2014
Kev do you know what causes it and is there anything that can be done to help preserve them , I think it's a general problem as I have an Oldsmobile that is suffering fatigue on the body
reg
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: first of 2014
Several things seem to be responsible and a metallurgist could probably explain better than I can. I smothered a 'CHARBENS' Rolls-Royce in 'WD 40' to see if that slowed down the process of fatigue causing lots of cracking to take place all over the model and so far it seems to have been effective, providing you don't mind your models having a nice coating of Water Repellent on all the metal surfaces!
I would not cover your entire Caddy with it, just the exposed areas, in particular the whole baseplate, just rub a slightly moistened cloth over it. A toolmaker would just use normal '3-in-1' type oil, but on model cars will not be good to handle and will ruin any card board packaging as it soaks in, nothing worse than cardboard and oil mixing together.
Ghosty.
I would not cover your entire Caddy with it, just the exposed areas, in particular the whole baseplate, just rub a slightly moistened cloth over it. A toolmaker would just use normal '3-in-1' type oil, but on model cars will not be good to handle and will ruin any card board packaging as it soaks in, nothing worse than cardboard and oil mixing together.
Ghosty.
Re: first of 2014
What we call fatigue is actually the result of lead precipitating out of the metal matrix and migrating by diffusion to the crystal boundaries where it oxidises, so forcing the crystals apart. IIRC, moisture is supposed to play a role in this process (probably by speeding up the oxidation of the lead), so WD40 should help slow down the process.
Re: first of 2014
todays Sandown finds 20a with gpw playworn and a slightly bent rear axle but only £8
and some lone stars I love the green zodiac , the blue Chrysler is a puzzler with the bonnet cast shut doors and boot open as normal ??
Kev any ideas as it has me stumped
and some lone stars I love the green zodiac , the blue Chrysler is a puzzler with the bonnet cast shut doors and boot open as normal ??
Kev any ideas as it has me stumped
- Attachments
-
- DSCI1688.JPG (70.02 KiB) Viewed 1021 times
-
- DSCI1684.JPG (60.64 KiB) Viewed 1021 times
-
- DSCI1685.JPG (73.58 KiB) Viewed 1021 times
-
- DSCI1686.JPG (85.22 KiB) Viewed 1021 times
-
- DSCI1687.JPG (69.67 KiB) Viewed 1021 times
reg