Hi all,
here is a RW #15 Vw 1500 Saloon. Auction base shot wasn't that bad, but now it's arrived...Fail!
Anyway I want to show it here and looking foward to your comments!
I wasn't sure if a label would be generally right on a metallic red RW version or if just decals were applied?!
Thanks,
Linus
RW #15 Vw 1500 Saloon...again and again!
-
- Posts: 406
- Joined: Fri Apr 25, 2014 1:24 pm
RW #15 Vw 1500 Saloon...again and again!
- Attachments
-
- DSC_2439.JPG (106.94 KiB) Viewed 1997 times
-
- DSC_2440.JPG (116.89 KiB) Viewed 1997 times
-
- DSC_2442.JPG (120.38 KiB) Viewed 1997 times
-
- DSC_2443.JPG (113.24 KiB) Viewed 1997 times
-
- DSC_2445.JPG (136.43 KiB) Viewed 1997 times
-
- DSC_2446.JPG (119.25 KiB) Viewed 1997 times
-
- DSC_2447.JPG (142.93 KiB) Viewed 1997 times
-
- DSC_2448.JPG (184.69 KiB) Viewed 1997 times
-
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: RW #15 Vw 1500 Saloon...again and again!
The rear rivet to me is showing signs of stress (circled), and the upright edges shows the results of a baseplate being forced away from a body making the outer edge of the rivet appear more upright than usual (arrowed). So even before you told us, I would have suspected some tampering has been done to the model.
GHOSTHUNTER.
GHOSTHUNTER.
Re: RW #15 Vw 1500 Saloon...again and again!
tough luck Linus it happens , hope it didn't cost too much
reg
-
- Posts: 406
- Joined: Fri Apr 25, 2014 1:24 pm
Re: RW #15 Vw 1500 Saloon...again and again!
Thanks for your statement Ghosty!
Thanks,
Linus
I had a limit for this one, and the price was in there...wasn't THAT much, but I will try to get some money backtough luck Linus it happens , hope it didn't cost too much
Thanks,
Linus
- nickjones
- Site Admin
- Posts: 2355
- Joined: Tue Nov 20, 2012 12:54 am
- Location: Clacton on Sea, Essex, UK
Re: RW #15 Vw 1500 Saloon...again and again!
Hi Linus.
Could I ask for a base photo of this model next to a normal one so we can compare the rivets, As only one other red regular wheel model is known to exist the chances are that it was made in Lesneys R & D workshop so may not be as perfect as one assembled in the factory.
Could I ask for a base photo of this model next to a normal one so we can compare the rivets, As only one other red regular wheel model is known to exist the chances are that it was made in Lesneys R & D workshop so may not be as perfect as one assembled in the factory.
Nick Jones.
In sunny Clacton-on-Sea, Essex, UK
In sunny Clacton-on-Sea, Essex, UK
-
- Posts: 406
- Joined: Fri Apr 25, 2014 1:24 pm
Re: RW #15 Vw 1500 Saloon...again and again!
Hello Nick,
sadly I don't have a normal Rw VW 1500 Saloon...all I can give you are some Sf's.
Greetings,
Linus
sadly I don't have a normal Rw VW 1500 Saloon...all I can give you are some Sf's.
Greetings,
Linus
- Attachments
-
- DSC_2476.JPG (185.86 KiB) Viewed 1914 times
-
- DSC_2477.JPG (172.87 KiB) Viewed 1914 times
-
- DSC_2478.JPG (197.94 KiB) Viewed 1914 times
-
- DSC_2479.JPG (132.58 KiB) Viewed 1914 times
- nickjones
- Site Admin
- Posts: 2355
- Joined: Tue Nov 20, 2012 12:54 am
- Location: Clacton on Sea, Essex, UK
Re: RW #15 Vw 1500 Saloon...again and again!
Hmmm...
It appears that the baseplate has been ground away around the rivet, if so then the original baseplate was removed with a dremel rather than a drill.
It appears that the baseplate has been ground away around the rivet, if so then the original baseplate was removed with a dremel rather than a drill.
Nick Jones.
In sunny Clacton-on-Sea, Essex, UK
In sunny Clacton-on-Sea, Essex, UK
Re: RW #15 Vw 1500 Saloon...again and again!
Rivit clearly hasnt been properly spun on this one. To make such a fake with such a long rivit stem as we can see in the photo means that this toy probably left the factory unspun so the base swap was easy however the maker has tried but failed to spin the rivit properly. To make this look like a real colour trial the unspun rivit should have been chiselled and then it would be impossible to say whether it was chiselled in 1970 or 2014!