George T.
#03, Casting
Re: Casting #3
Hello numi just read your last post about having the tail board at the bottom, so may be this will help you to see it with-out the ridge, I hope
George T.
George T.
Re: Casting #3
Hi Numikerbside wrote:Hell Antonin, and numi I think it is much more easy to post a photo of the same model with-out the ridge as this one is.
George T.
I am enclosing once more the photo of the tipper bed with the ridge (or step?, or strengthening?, or rib?, or reinforcement?)
- Attachments
-
- DSCN5268b.JPG (35.75 KiB) Viewed 1583 times
Last edited by Diecast on Fri Jun 13, 2014 3:16 pm, edited 4 times in total.
Re: Casting #3
and the tipper with the smooth bed (without the ridge). I hope that the difference is clear now.
Antonin
Antonin
- Attachments
-
- DSCN5267b.JPG (33.69 KiB) Viewed 1583 times
-
GHOSTHUNTER
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: Casting #3
I believe "Antonin" is trying to highlight these lines and marks, highlighted here by myself in yellow.
GHOSTHUNTER.
- DSCN5267b.JPG (57.89 KiB) Viewed 1577 times
Re: Casting #3
kerbside wrote:Hell Antonin, and numi I think it is much more easy to post a photo of the same model with-out the ridge as this one is.
Though it is quite hard to see in a photo.
George T.
Thanks Mr Marshall for the clear Bedford pics and such nice pics coming from u as alwayskerbside wrote:Hello numi just read your last post about having the tail board at the bottom, so may be this will help you to see it with-out the ridge, I hope
George T.
Most appreciated,
numi
numi
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
Re: Casting #3
The best i could do with trying to enlarge this pic and remove any glare.
numi
numi
- Attachments
-
- DSCN5268b.JPG (97.85 KiB) Viewed 1549 times
numi
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
Re: Casting #3
It seems odd to me that the ridge does not align with the ends of the ribs in the bed. Rather than being a deliberate casting variation, could this instead be the result of tool misalignment?
Re: Casting #3
If you look at the photo Ghosty has circled Antonin, I see the line on the body's inner sidewall Numi is talking about, indicating the tailgate was in the Dump box when this one was painted. It now also shows up in Numi's latest enlarged shot, being just a straight dark line on the right wall. The ridge shown by Stannard in his illustration shows the ridge line well behind the end of the bed ribs. I don't have one of these variations, but I now must question this one further. Didn't you show us one of these quite a while ago Numi with that ridge, or was it just a discussion?? kwakers
Re: Casting #3
Hi Kwakers,i do remember hijacking Tinmans thread (sorry Tinman) some time ago on his 3b Bedford and i presume it was on the old forum but yes,i could be wrong.If its on this forum then Idris is the best person to help dig it up.We had discussed the Maroon Ridged Tipper with pics but my specimen & my external hard-drive with pics are back home.kwakers wrote:If you look at the photo Ghosty has circled Antonin, I see the line on the body's inner sidewall Numi is talking about, indicating the tailgate was in the Dump box when this one was painted. It now also shows up in Numi's latest enlarged shot, being just a straight dark line on the right wall. The ridge shown by Stannard in his illustration shows the ridge line well behind the end of the bed ribs. I don't have one of these variations, but I now must question this one further. Didn't you show us one of these quite a while ago Numi with that ridge, or was it just a discussion?? kwakers
numi
numi
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
One cannot do much with all the monies in this world but can do much more if he strives toward contentment.
Re: Casting #3
You flatter me! (Please keep it up!)numi wrote:[....Idris is the best person to help dig it up....
I can't find it on this Forum (and I'm pretty sure that I've looked for it before, also without success.) I have the idea that it was on Lefora, but after The Change (which is why you might have thought it was on this Forum).