first of 2014 & some

A place to show your latest finds
Locked
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: first of 2014

Post by GHOSTHUNTER »

Does this picture posted by "Fixer" show two body castings...look at the little 'Blob' (side repeater lamp), is one of them lower down!!

In fact they are both wrong, on the real car they are higher up, almost level with the top of the arch-edge!


Ghosty.
Attachments
014 %28600x450%29.jpg
014 %28600x450%29.jpg (79.78 KiB) Viewed 397 times
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: first of 2014

Post by fixer »

motorman wrote:Here's mine Reg
i'll get me coat that minty one makes my one a bit :oops: :oops:
reg
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: first of 2014

Post by GHOSTHUNTER »

fixer wrote:
motorman wrote:Here's mine Reg
i'll get me coat that minty one makes my one a bit :oops: :oops:
Ah! Reg, remember this..."A bad model is better than no model at all"...

Ghosty.
User avatar
motorman
Moderator
Posts: 6863
Joined: Sun Sep 15, 2013 6:09 pm
Location: Glasgow, Scotland

Re: first of 2014

Post by motorman »

GHOSTHUNTER wrote:
fixer wrote:
motorman wrote:Here's mine Reg
i'll get me coat that minty one makes my one a bit :oops: :oops:
Ah! Reg, remember this..."A bad model is better than no model at all"...

Ghosty.
I agree with Ghosty.
MOTORMAN

"Kill all my demons and my angels will die too"
User avatar
motorman
Moderator
Posts: 6863
Joined: Sun Sep 15, 2013 6:09 pm
Location: Glasgow, Scotland

Re: first of 2014

Post by motorman »

I have often wondered if the base of mine is bare mazak?

Any thoughts?
Attachments
2014-02-14 11.07.43.jpg
2014-02-14 11.07.43.jpg (62.78 KiB) Viewed 387 times
MOTORMAN

"Kill all my demons and my angels will die too"
User avatar
fixer
Moderator
Posts: 3655
Joined: Sun Sep 15, 2013 4:59 pm
Location: basildon essex

Re: first of 2014

Post by fixer »

looks like it is Alex , here's a base shot of mine looks to have traces of being plated
Attachments
019 (600x450).jpg
019 (600x450).jpg (146.85 KiB) Viewed 384 times
reg
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: first of 2014

Post by GHOSTHUNTER »

The actual 'Plated' look on these models baseplates is not the same 'Plated' finish as seen on 'Giftware' 'Yesteryears' or the bright Chromed plastic parts on later 'Superfast' models.

The effect on these models (The Iso Griffo above and others), is created by the mix of metals in the raw Mazac metal, one of those metals being an Alloy I.E. a trace of Alluminum (Alluminium), which sadly over time does tend to turn darker, with the general atmosphere and a certain amount of oxidisation. This is not unique to Matchbox as both Corgi and Dinky models suffer the same fate.

Had the baseplates been properly 'Chrome' effect plated, the models would look more accurate in many cases, but the cost would have been too high, the Alloy approach was more effective at the time when the models were new and once played with for a while, the look did not really matter that much to the kids playing with them!!!

Ghosty.
User avatar
motorman
Moderator
Posts: 6863
Joined: Sun Sep 15, 2013 6:09 pm
Location: Glasgow, Scotland

Re: first of 2014

Post by motorman »

GHOSTHUNTER wrote:The actual 'Plated' look on these models baseplates is not the same 'Plated' finish as seen on 'Giftware' 'Yesteryears' or the bright Chromed plastic parts on later 'Superfast' models.

The effect on these models (The Iso Griffo above and others), is created by the mix of metals in the raw Mazac metal, one of those metals being an Alloy I.E. a trace of Alluminum (Alluminium), which sadly over time does tend to turn darker, with the general atmosphere and a certain amount of oxidisation. This is not unique to Matchbox as both Corgi and Dinky models suffer the same fate.

Had the baseplates been properly 'Chrome' effect plated, the models would look more accurate in many cases, but the cost would have been too high, the Alloy approach was more effective at the time when the models were new and once played with for a while, the look did not really matter that much to the kids playing with them!!!

Ghosty.
Thanks Kevin, having said that, do you think my base has been plated at some time or is it bare?
MOTORMAN

"Kill all my demons and my angels will die too"
GHOSTHUNTER
Moderator
Posts: 12249
Joined: Sun Sep 15, 2013 4:12 pm

Re: first of 2014

Post by GHOSTHUNTER »

I have to say it looks in the picture to be bare metal (Mazac/Mazak being the type of metal used, a more refined type of metal than 'Pig Iron' used in the 1940's -50's for toy cars etc), and is a common look on our models. I don't see any signs of actual 'Plating' by whatever means "Matchbox" had access to at the time of this models introduction.

Ghosty.
User avatar
motorman
Moderator
Posts: 6863
Joined: Sun Sep 15, 2013 6:09 pm
Location: Glasgow, Scotland

Re: first of 2014

Post by motorman »

GHOSTHUNTER wrote:I have to say it looks in the picture to be bare metal (Mazac/Mazak being the type of metal used, a more refined type of metal than 'Pig Iron' used in the 1940's -50's for toy cars etc), and is a common look on our models. I don't see any signs of actual 'Plating' by whatever means "Matchbox" had access to at the time of this models introduction.

Ghosty.
In the hand the base looks very raw. I think it is bare mazak after all.
MOTORMAN

"Kill all my demons and my angels will die too"
Locked