Or just an optical illusion.
Trolly bus 56a black wheels.
Trolly bus 56a black wheels.
These black wheels smaller than the other.
Or just an optical illusion.
Or just an optical illusion.
- Attachments
-
- dscn9642.JPG (205.19 KiB) Viewed 797 times
-
- dscn9644.JPG (189.25 KiB) Viewed 797 times
Mike & Nico from Austria.
-
GHOSTHUNTER
- Moderator
- Posts: 12249
- Joined: Sun Sep 15, 2013 4:12 pm
Re: Trolly bus 56a black wheels.
Definitley smaller
Ghosty.
Ghosty.
Re: Trolly bus 56a black wheels.
I vote smaller too. Mike you can buy a digital caliper/Vernier etc cheaply on ebay and they can be useful for checking these sort of measurements 
John
There's nothing regular about wheels
There's nothing regular about wheels
Re: Trolly bus 56a black wheels.
Johnboy, I send you a photo of my digital caliper,johnboy wrote:I vote smaller too. Mike you can buy a digital caliper/Vernier etc cheaply on ebay and they can be useful for checking these sort of measurements
And the difference of the wheels.
- Attachments
-
- DSCN9661.JPG (203.2 KiB) Viewed 763 times
-
- DSCN9665.JPG (191.79 KiB) Viewed 763 times
Mike & Nico from Austria.
Re: Trolly bus 56a black wheels.
Sorry, a photo with the purified black wheels. 
- Attachments
-
- DSCN9668.JPG (185.57 KiB) Viewed 758 times
Mike & Nico from Austria.
-
matchbox_n_molars
- Posts: 451
- Joined: Sun Sep 15, 2013 6:16 pm
- Location: Scenic Cincinnati, Ohio
- Contact:
Re: Trolly bus 56a black wheels.
Your black wheeled model is interesting Mike. Where else within the range were there black plastic wheels used that were less than 7.0mm in diameter? What other toy was fitted with wheels this small that could have been the source for these wheels on Mike's trolley?
Greg in Cincinnati
Re: Trolly bus 56a black wheels.
I al you can not judge by the GPW model in the 2nd photo as that is nearer the camera than the other two, as you can see that the mud guards are higher.
I have just checked three of mine with a veneer the GPW was 7.39 the SPW was 7.21 and the BPW was only 6.91, so none of them was 7.5 as listed, so I suppose it depends on the child who had them before you ran them on the carpet or the concrete to wear the wheels down.
Other collectors may think differently to me, and I do not think any wheels less than 7.5mm were ever used, only on hubs were smaller sizes used.
George T.
I have just checked three of mine with a veneer the GPW was 7.39 the SPW was 7.21 and the BPW was only 6.91, so none of them was 7.5 as listed, so I suppose it depends on the child who had them before you ran them on the carpet or the concrete to wear the wheels down.
Other collectors may think differently to me, and I do not think any wheels less than 7.5mm were ever used, only on hubs were smaller sizes used.
George T.
-
matchbox_n_molars
- Posts: 451
- Joined: Sun Sep 15, 2013 6:16 pm
- Location: Scenic Cincinnati, Ohio
- Contact:
Re: Trolly bus 56a black wheels.
Hello George,kerbside wrote:I al you can not judge by the GPW model in the 2nd photo as that is nearer the camera than the other two, as you can see that the mud guards are higher.
I have just checked three of mine with a veneer the GPW was 7.39 the SPW was 7.21 and the BPW was only 6.91, so none of them was 7.5 as listed, so I suppose it depends on the child who had them before you ran them on the carpet or the concrete to wear the wheels down.
Other collectors may think differently to me, and I do not think any wheels less than 7.5mm were ever used, only on hubs were smaller sizes used.
George T.
Thank you for your interest.
But the tire profile is still very good.
For strongly played models, the profile looks different.
Greetings Mike
Mike & Nico from Austria.